+852-3069 6950
css@gugent.com.hk
Home Products
Catalog No. SN1HA47FH3
Part No. SN1HA47FH3
Supplier Merck KGaA
Optiscale® Capsule Polygard®-CN 10 µm 3/4 in. TC-1/4 in. HB
Net Price
110
Availability

4 weeks

PROPERTIES
  • Bacterial Endotoxins
    Aqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
  • Catalogue Number
    SN1HA47FH3
  • Chemistry
    Polypropylene (PP)
  • Device Configuration
    Capsule
  • Device Material
    Polycarbonate
  • Diameter
    6.9 cm (2.7 in.)
  • Filtration Area
    17.7 cm²
  • Format
    Single Layer
  • Good Manufacturing Practices
    These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
  • Indirect Food Additive
    All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
  • Inlet Connection
    Sanitary Flange
  • Inlet Connection Diameter
    3/4 in.
  • Material Size
    3
  • Maximum Inlet Pressure (psig)
    80 psig
  • Maximum Inlet Pressure, bar (psi)
    5.5 bar (80 psi) @ 25 °C
  • Maximum Inlet Temperature
    25 °C
  • Media
    Polygard®-CN
  • Nominal Pore Size
    10.0 µm
  • Outlet Connection
    Hose Barb
  • Outlet Connection Diameter
    1/4 in.
  • Oxidizable Substances
    Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥100 mL
  • Pore Size
    10.0 µm
  • Seal Material
    Fluoroelastomer (FKM)
  • Sterilization
    3 autoclave cycles of 60 min @ 126 °C; not in-line steam sterilizable
  • Support Material
    Polypropylene
  • Trade Name
    OptiScale®
  • Vent Cap Material
    Polyvinylidene fluoride (PVDF)
DESCRIPTION
Genuine product
CUSTOMERS ALSO VIEWED

Thermo Fisher Scientific Inc.     THM-SNO24435

TLD-200™ Thermoluminescent Dosimetry Material

Special offer /Each

Merck KGaA     SN1HA47FH3

Optiscale® Capsule Polygard®-CN 10 µm 3/4 in. TC-1/4 in. HB

110 /Each

Merck KGaA     MK150377

LiChrospher® 100 RP-18 (5 µm) Hibar® RT 250-4

Special offer /Each

MACHEREY‑NAGEL     MN726215.50

GC column, Nonpolar–low polar, OPTIMA 5 MS, 50 m L, 0.20 mm ID, 0.35 µm df

Special offer /Each

Cytiva     CYT18111064

Signal Cable, (6-pin miniDin-Open)

423 /Each

SHIMADZU CORPORATION     220-97354-34

Column, LC, Premier Callisto C18(2) 10u 3.2 x 50mm

487 /Each

Agilent Technologies     AGIL299-2003

GPC/SEC column frits, Ti, 8 mm column ID. Compatible with GRAM, MAB, MCX, NOVEMA Max, PFG, PolarSil, POLEFIN, PROTEEMA, SDV, SUPREMA, EasyValid 8 mm ID columns, 2/pk

115 /Each

Agilent Technologies     AGIL773450-902K

ZORBAX Extend-C18, 80Å, 4.6 x 150 mm, 5 µm, MVK, 3/pk; Method validation kit, includes three columns (p/n 773450-902) from three different lots

2081 /Each

Thermo Fisher Scientific Inc.     THM-R21617

Cary-Blair with Indicator Single Vial

Special offer /Each

AB Sciex LLC     ABS1024971

Fitting Union Tee

13 /Each

Waters Corporation     WATS-186005862

XSelect HSS PFP Column, 100Å, 3.5 µm, 4.6 mm X 150 mm, 1/pk

990 /Each

Waters Corporation     WATS-186006443

XSelect HSS C18 SB Column, 100Å, 5 µm, 4.6 mm X 75 mm, 1/pk

783 /Each
RELATED CATEGORIES
Contact
Flat 06C, 17/F, Wah Fat Industrial Building, 10-14 Kung Yip Street, Kwai Chung, N.T., Hong Kong
+852-3069 6950
+852-2481 3702
css@gugent.com.hk
www.gugent.com.hk
  • Lab supplies
  • Instruments
  • Resources
  • About us
  • Contact
  • Terms and Conditions
  • Privacy Policy
    • Copyright © Gugent Technology Co., Limited