+852-3069 6950
css@gugent.com.hk
Home Products
Catalog No. CP20N4S03
Part No. CP20N4S03
Supplier Merck KGaA
Lifegard™ Cartridge Filter 4 in. 2.0 µm Code N
Net Price
256
Availability

4 weeks

PROPERTIES
  • Bacterial Endotoxins
    Aqueous extraction contains ≤1.0 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
  • Cartridge Code
    Code N (2-226) O-rings w/locking-tabs
  • Cartridge Nominal Length
    4 in. (10 cm)
  • Catalogue Number
    CP20N4S03
  • Chemistry
    Borosilicate Glass Fiber (BGF)
  • Device Configuration
    Cartridge
  • Device Material
    Polypropylene
  • Device Size
    4 in.
  • Diameter
    7.4 cm (2.9 in.)
  • Filter Grade
    AP20
  • Filtration Area
    0.16 m²
  • Format
    Single Layer
  • Good Manufacturing Practices
    These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
  • Gravimetric Extractables
    The extractables level was equal to or less than 88 mg per 4-inch cartridge after 24 hours in water at controlled room temperature.
  • Length
    4 in. (10 cm)
  • Material Package
    Double Easy-Open bag
  • Material Size
    3
  • Maximum Differential Pressure, bar (psid)
    3.5 bar (50 psid) @ 25 °C
  • Maximum Inlet Pressure, bar (psi)
    3.5 bar (50 psi) @ 25 °C
  • Media
    Lifegard™
  • Nominal Pore Size
    2.0 µm
  • Oxidizable Substances
    Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥5 L
  • Pore Size
    2.0 µm
  • Sanitization
    30 min with hot water @ 80 °C
  • Seal Material
    Silicone (SI)
  • Sterilization
    10 autoclave cycles or SIP @ 121 °C for 30 min
  • Support Material
    Polypropylene
  • Trade Name
    Lifegard™
  • USP Bacterial Endotoxins
    A sample aqueous extraction contains less than 1.0 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
DESCRIPTION
Genuine product
CUSTOMERS ALSO VIEWED

Thermo Fisher Scientific Inc.     THM70904603

HARNESS, DISPLAY BOARD

69.85 /Each

Merck KGaA     CP20N4S03

Lifegard™ Cartridge Filter 4 in. 2.0 µm Code N

256 /Each

Agilent Technologies     G2855-28503

CFT Ferrule Flex Gold 0.53mm ID Col 10PK. Flexible Metal ferrule, gold-plated, 0.8 mm id, for 0.53 mm id fused silica tubing.

91 /Each

Agilent Technologies     G3188-27501

Flexible Metal ferrule, UltiMetal Plus, 0.4 mm id, for 0.1 to 0.25 mm id fused silica tubing, 10/pk

75 /Each

Merck KGaA     KWL3A10HH1

Opticap® XL10 Milligard® Low Protein Binding 0.2 µm 9/16 in. HB/HB

279 /Each

Agilent Technologies     AGIL5190-3169

Inlet liner, Ultra Inert, split, low pressure drop, glass wool, 25/pk

889 /Each

Agilent Technologies     AGIL5190-2297

Inlet liner, Ultra Inert, splitless, dimpled, 2 mm id

65 /Each

Agilent Technologies     AGIL14-7656-000

Carbon filter, used with Solatek 72 purge and trap systems

Special offer /Each

Agilent Technologies     AGIL14-5663-016

Ferrule, 1/16 inch, PTFE, 1-piece (for needle in mount), used with AQUATek 70 purge and trap systems

38 /Each

Agilent Technologies     AGIL5190-2232

Frit sparger glassware kit, 25 mL, for Atomx

160 /Each

Agilent Technologies     G2855-28502

CFT Ferrule Flex Gold 0.32mm ID Col 10PK. Flexible Metal ferrule, gold-plated, 0.5 mm id, for 0.32 mm fused silica tubing.

91 /Each

Agilent Technologies     AGIL14-7835-090

Temperature control board, used with Solatek 72 and Velocity purge and trap systems

2717 /Each
RELATED CATEGORIES
Contact
Flat 06C, 17/F, Wah Fat Industrial Building, 10-14 Kung Yip Street, Kwai Chung, N.T., Hong Kong
+852-3069 6950
+852-2481 3702
css@gugent.com.hk
www.gugent.com.hk
  • Lab supplies
  • Instruments
  • Resources
  • About us
  • Contact
  • Terms and Conditions
  • Privacy Policy
    • Copyright © Gugent Technology Co., Limited