KTGRA02NN3 - Merck - Filters and Filtration - Chromatography - Lab supplies

: Catalog No. KTGRA02NN3

Part No. KTGRA02NN3
Supplier Merck KGaA

Opticap XL 2 with Aervent - 2" 0.2um NPT/NPT 3pk

Net Price

355

Availability

4 weeks

PROPERTIES

Bacterial Endotoxins

A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Bacterial Retention

Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
Cartridge Nominal Length

2 in. (5 cm)
Catalogue Number

KTGRA02NN3
Chemistry

Polytetrafluoroethylene (PTFE)
Device Configuration

Capsule
Device Material

Polypropylene
Device Size

2 in.
Diameter

8.4 cm (3.3 in.)
European Pressure Equipment Directive

EMD Millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
Filtration Area

0.1 m²
Good Manufacturing Practices

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Gravimetric Extractables

The extractables level was equal to or less than 15 mg after 24 hours in a 70/30% IPA/water mixture at controlled room temperature.
Housing Material

Polypropylene (PP)
Inlet Connection

NPT
Inlet Connection Diameter

1/4 in.
Length

2 in. (5 cm)
Material Package

Double Easy-Open bag
Material Size

3
Maximum Differential Pressure, bar (psid)

Forward: 5.5 bar (80 psid) @ 25 °C; 1.0 bar (15 psid) @ 80 °C. Reverse: 4.1 bar (60 psid) @ 25 °C, intermittent
Maximum Inlet Pressure (psig)

80 psig
Maximum Inlet Pressure, bar (psi)

5.5 bar (80 psi) @ 25 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C
Maximum Inlet Temperature

25 °C
Media

Aervent®
Non-Fiber Releasing

This product was manufactured with a PTFE membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
Outlet Connection

NPT
Outlet Connection Diameter

1/4 in.
Pore Size

0.2 µm
Seal Material

Silicone (SI)
Sterilization

30 autoclave cycles of 30 min @ 135 °C; not in-line steam sterilizable
Trade Name

Opticap®
USP Bacterial Endotoxins

A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Vent Cap Material

Polypropylene (PP)
Wettability

Hydrophobic

DESCRIPTION

Genuine product