+852-3069 6950
css@gugent.com.hk
Home Products
Catalog No. CP1503S03
Part No. CP1503S03
Supplier Merck KGaA
Lifegard™ Cartridge Filter 30 in. 1.0 µm Code 0
Net Price
661
Availability

4 weeks

PROPERTIES
  • Bacterial Endotoxins
    Aqueous extraction contains ≤1.0 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
  • Cartridge Code
    Code 0 (2-222) O-rings
  • Cartridge Nominal Length
    30 in. (75 cm)
  • Catalogue Number
    CP1503S03
  • Chemistry
    Borosilicate Glass Fiber (BGF)
  • Device Configuration
    Cartridge
  • Device Material
    Polypropylene
  • Device Size
    30 in.
  • Diameter
    7.4 cm (2.9 in.)
  • Filter Grade
    AP15
  • Filtration Area
    1.14 m²
  • Format
    Single Layer
  • Good Manufacturing Practices
    These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
  • Gravimetric Extractables
    The extractables level was equal to or less than 250 mg per 10-inch cartridge after 24 hours in water at controlled room temperature.
  • Length
    30 in. (75 cm)
  • Material Package
    Double Easy-Open bag
  • Material Size
    3
  • Maximum Differential Pressure, bar (psid)
    3.5 bar (50 psid) @ 25 °C
  • Maximum Inlet Pressure, bar (psi)
    3.5 bar (50 psi) @ 25 °C
  • Media
    Lifegard™
  • Nominal Pore Size
    1.0 µm
  • Oxidizable Substances
    Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥5 L
  • Pore Size
    1.0 µm
  • Sanitization
    30 min with hot water @ 80 °C
  • Seal Material
    Silicone (SI)
  • Sterilization
    10 autoclave cycles or SIP @ 121 °C for 30 min
  • Support Material
    Polypropylene
  • Trade Name
    Lifegard™
  • USP Bacterial Endotoxins
    A sample aqueous extraction contains less than 1.0 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
DESCRIPTION
Genuine product
CUSTOMERS ALSO VIEWED

Thermo Fisher Scientific Inc.     A0101-03151

Fitting, Swagelok™ Reducer 1/8" to 1/16"

177.81 /Each

Merck KGaA     CP1503S03

Lifegard™ Cartridge Filter 30 in. 1.0 µm Code 0

661 /Each

MACHEREY‑NAGEL     MN762571.100

VP HPLC column (preparative), NUCLEODUR C18 HTec, 10 µm, 50x10 mm

Special offer /Each

Pall Corporation     NXA0510U

Nexis® A Series Filter Cartridges, Removal Rating 0.5 μm, Polypropylene, Length 10 inches

67 /Each

GL Sciences Inc.     GLS5020-88009

InertSustainSwift C18 HPLC Column, 5 µm, 50 x 3.0 mm (analytical)

406 /Each

PerkinElmer Inc.     N0781016

Quartz Injector, 1.6 mm I.D. Optima 8x00

171 /Each

Agilent Technologies     AGIL112-8867-INT

J&W HP-88 Intuvo GC column module, 60 m, 0.25 mm, 0.2 µm. (compatible only with the Intuvo 9000 GC System)

1201 /Each

Agilent Technologies     AGIL19091S-433I

J&W HP-5ms Inert GC Column, 30 m, 0.25 mm, 0.25 µm

703 /Each

Waters Corporation     WATS-430001835

Tubing Assembly, Capillary with frit, 75µm x 8 in

450 /Each

Waters Corporation     WATS-186007751

Symmetry Shield RP18 VanGuard Cartridge, 100Å, 3.5 µm, 3.9 mm X 5 mm, 3/pk

441 /Each

Pall Corporation     HC7504FRS4Z

Supralon GlassFiber 12 micron (Beta 2000) Fluorocarbon 4in 10.16 cm

134 /Each

Thermo Fisher Scientific Inc.     THM078959

Acclaim™ Surfactant Plus HPLC Column, 5 μm, 3 × 10 mm

319.63 /Each
RELATED CATEGORIES
Contact
Flat 06C, 17/F, Wah Fat Industrial Building, 10-14 Kung Yip Street, Kwai Chung, N.T., Hong Kong
+852-3069 6950
+852-2481 3702
css@gugent.com.hk
www.gugent.com.hk
  • Lab supplies
  • Instruments
  • Resources
  • About us
  • Contact
  • Terms and Conditions
  • Privacy Policy
    • Copyright © Gugent Technology Co., Limited