- 
				    
					Bacterial Endotoxins Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test 
- 
				    
					Bacterial Retention Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology. 
- 
				    
					Cartridge Code Code 5 (2-222) O-rings and spear 
- 
				    
					Cartridge Nominal Length 20 in. (50 cm) 
- 
				    
					Catalogue Number CVGL52TP3 
- 
				    
					Chemistry Polyvinylidene Fluoride (PVDF) 
- 
				    
					Device Configuration Cartridge 
- 
				    
					Device Material Polypropylene 
- 
				    
					Device Size 20 in. 
- 
				    
					Diameter 6.9 cm (2.7 in.) 
- 
				    
					Filtration Area 1.38 m² 
- 
				    
					Flow Rate 50 L/min @ 700 mbar ΔP 
- 
				    
					Good Manufacturing Practices These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. 
- 
				    
					Indirect Food Additive All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182. All component materials meet the requirements of the EU framework regulation [1935/2004/EC] regarding materials and articles intended to contact food. 
- 
				    
					Length 20 in. (50 cm) 
- 
				    
					Material Package Double Easy-Open bag 
- 
				    
					Material Size 3 
- 
				    
					Maximum Differential Pressure, bar (psid) Forward: 5.5 bar (80 psid) @ 25 °C; 1.7 bar (25 psid) @ 80 °C; 0.35 bar (5 psid) @ 135 °C. Reverse: 3.5 bar (50 psid) @ 25 °C 
- 
				    
					Maximum Inlet Pressure, bar (psi) Forward - 5.5 bar (80 psi) @ 25 °C; 1.7 bar (25 psi) @ 80 °C; 0.35 bar (5 psi) @ 135 °C; Reverse - 3.5 bar (50 psi) @ 25 °C 
- 
				    
					Media Durapore® 
- 
				    
					Non-Fiber Releasing This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). 
- 
				    
					Oxidizable Substances Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥2 L 
- 
				    
					Pore Size 0.22 µm 
- 
				    
					Seal Material Silicone (SI) 
- 
				    
					Sterility Other 
- 
				    
					Sterilization 30 SIP cycles of 30 min @ 135 °C; 30 autoclave cycles of 60 min @ 126 °C 
- 
				    
					Support Material Polypropylene 
- 
				    
					Trade Name Durapore® 
- 
				    
					USP Bacterial Endotoxins A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test. 
- 
				    
					Wettability Hydrophilic