1 week
MACHEREY‑NAGEL MN723515.10
GC column, polar, PERMABOND CW 20 M, 10 m L, 0.53 mm ID, 0.5 µm df
Special offer /Each
Agilent Technologies AGIL8001-0017
Agilent Self Tightening column nut kit for Shimadzu, Includes nut for SPL inlet, nut for standard detector connection, 0.5 mm graphite/polyimide ferrules (10/pk) for 320 µm columns
243 /Each
Agilent Technologies AGIL5043-0065
PVC flexible ducting 50 mm id, 5 m length for use with Agilent SPS 4 autosampler. Fitted with 56 mm od EPDM cuffs on each end of the tubing
147 /Each
Phenomenex 8B-S008-KDG
Strata SAX (55 µm, 70 Å), 2 g / 12 mL, Giga Tubes, 20/Pk
170.61 /Each
Agilent Technologies AGIL8010-0245
Inlet septa, 17 mm, Non-stick Long Life, 24/pk
92 /Each
Thermo Fisher Scientific Inc. THM-S306606A
Thermistor (DP) ass'y
783.22 /Each
Phenomenex AG6-4120
Zebron Gas Management-Elec. Indicator/Gas Filter, Electronic Indicator for GC, Ea
55.74 /Each
Agilent Technologies ICM-101
ICP Calibration Standard (VIII)
213 /Each
Agilent Technologies G8010-60346
Nebulizer, gas humidifier, for 5000 Series ICP-OES and 4200 Series MP-AES. Used to humidify the nebulizer gas when analyzing samples with high concentrations of Total Dissolved Solids (TDS). This helps to reduce blockage in the nebulizer and sample introd
1716 /Each
Agilent Technologies AGIL8010-0457
Agilent syringe plunger for CTC HPLC, replacement for 10 µL 8010-0445, 10/pk
354 /Each
Agilent Technologies G8003-67000
Sample introduction kit, high sensitivity, for routine aqueous samples with Agilent MP-AES. Recommended for use with aqueous samples where higher sensitivity is required. Includes single pass glass cyclonic spray chamber (G8000-70006), concentric nebulize
1423 /Each
Agilent Technologies G3666-67044
Screw, spacer and O-ring kit for ORS cell, for 8900 without axial accelerator. Suitable for Agilent 8900 ICP-MS standard model without axial acceleration (not advanced or semiconductor model)
490 /Each