Sepax Technologies Inc     401NP10-2001

Proteomix SCX-NP10 column, 2.0×10mm, Non-Porous, 10 µm

245 /Each

Sartorius AG     16533----------K

Minisart® Syringe Filter, Polyethersulfone (PES), Pore Size 0.45 µm, Ethylene Oxide, Female Luer Lock, Male Luer Slip, Pack Size 50

137 /Each

Pall Corporation     PFT0210USM7425

Poly-Fine® II, Filter Cartridges, Removal Rating 0.2 μm, Highly Asymetric Polysulfone, Length 10 Inches, silicone, SOE fin end external 226 O-rings, No Bubble Test

122 /Each

Pall Corporation     HC2226FRP6H50

Supralon GlassFiber 5 micron (Beta 2000) Nitrile 6in 15.24cm

113 /Each

Thermo Fisher Scientific Inc.     THM73205-152130

BioBasic™ SCX HPLC Column, 5 μm, 2.1 × 150 mm

612 /Each

Sartorius AG     CQP3FB2151

4Cell® SmartCHO Production Medium 200L Powder

9408 /Each

Thermo Fisher Scientific Inc.     THM-STARA3240

Orion Star™ A324 pH/ISE Portable Multiparameter Meter

876 /Each

Agilent Technologies     G3280-80503

Quartz Spray chamber with fixed connector to torch, Scott double-pass, recommended for ultra-trace analysis of Boron. For use without aerosol gas dilution, not compatible with HMI or UHMI. Optional on all Agilent ICP-MS. Requires End Cap G3280-60008

1448 /Each

Agilent Technologies     G3280-80008

Quartz Spray chamber, Scott double-pass, standard for Agilent 7500, 7700, 7800 and 8800. For use with HMI or no aerosol gas dilution. Also suits 7850 / 7900 / 8900 if UHMI capability is not required. Requires End Cap G3280-60008

529 /Each

Pall Corporation     DFNT04540UN

Duo-Fine® II, Filter Cartridges, Removal Rating 0.45 μm, Length 40 Inches, Nitrile, Blank - DOE with elastomer gasket seals & end caps

1496 /Each

Agilent Technologies     G3280-60077

Drain Tubing for aqueous waste, PVC Tygon®, 3 mm id, 6 mm OD, 3 m length per unit. Suitable for use for aqueous samples from spray chamber drain peristaltic pump tubing or Autosampler drain to waste vessel. Used with all Agilent ICP-MS models.

96 /Each

Agilent Technologies     G3280-60008

End cap for Scott spray chamber. Suitable for use with Agilent 7700, 7800, 7850, 7900, 8800, 8900 ICP-MS

273 /Each