We have developed a unique portfolio of consumables, each adapted to the different feed water quality requirements and to your various applications. To maintain your water system’s performance, it’s critical to replace your purification cartridges on time and with genuine ISO 9001-certified parts.
Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Cartridge Nominal Length
1 in. (2.5 cm)
Catalogue Number
KR75A51HH1
Chemistry
Polypropylene (PP)
Device Configuration
Capsule
Device Material
Polypropylene
Device Size
1 in.
Diameter
10.7 cm (4.2 in.)
European Pressure Equipment Directive
EMD Millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
Format
Single Layer
Good Manufacturing Practices
These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Gravimetric Extractables
The extractables level was equal to or less than 10 mg per capsule after 24 hours in water at controlled room temperature.
Housing Material
Polypropylene (PP)
Indirect Food Additive
All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Inlet Connection
Hose Barb
Inlet Connection Diameter
9/16 in.
Inlet to Outlet Width
21.6 cm (8.5 in.)
Length
1 in. (2.5 cm)
Material Package
Double Easy-Open bag
Material Size
1
Maximum Differential Pressure, bar (psid)
4.8 bar (70 psid) @ 20 °C
Maximum Inlet Pressure (psig)
80 psig
Maximum Inlet Pressure, bar (psi)
5.5 bar (80 psi) @ 25 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C
Maximum Inlet Temperature
25 °C
Media
Polygard®-CR
Nominal Pore Size
75.0 µm
Outlet Connection
Hose Barb
Outlet Connection Diameter
9/16 in.
Oxidizable Substances
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥1 L
Pore Size
75.0 µm
Seal Material
Silicone (SI)
Sterilization
3 autoclave cycles of 30 min @ 126 °C; not in-line steam sterilizable
Support Material
Polypropylene
Trade Name
Opticap®
USP Bacterial Endotoxins
A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Cartridge Nominal Length
1 in. (2.5 cm)
Catalogue Number
KR99A51FF1
Chemistry
Polypropylene (PP)
Device Configuration
Capsule
Device Material
Polypropylene
Device Size
1 in.
Diameter
10.7 cm (4.2 in.)
European Pressure Equipment Directive
EMD Millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
Format
Single Layer
Good Manufacturing Practices
These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Gravimetric Extractables
The extractables level was equal to or less than 10 mg per capsule after 24 hours in water at controlled room temperature.
Housing Material
Polypropylene (PP)
Indirect Food Additive
All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Inlet Connection
Sanitary Flange
Inlet Connection Diameter
3/4 in.
Inlet to Outlet Width
21.6 cm (8.5 in.)
Length
1 in. (2.5 cm)
Material Package
Double Easy-Open bag
Material Size
1
Maximum Differential Pressure, bar (psid)
4.8 bar (70 psid) @ 20 °C
Maximum Inlet Pressure (psig)
80 psig
Maximum Inlet Pressure, bar (psi)
5.5 bar (80 psi) @ 25 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C
Maximum Inlet Temperature
25 °C
Media
Polygard®-CR
Nominal Pore Size
100.0 µm
Outlet Connection
Sanitary Flange
Outlet Connection Diameter
3/4 in.
Oxidizable Substances
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥1 L
Pore Size
100.0 µm
Seal Material
Silicone (SI)
Sterilization
3 autoclave cycles of 30 min @ 126 °C; not in-line steam sterilizable
Support Material
Polypropylene
Trade Name
Opticap®
USP Bacterial Endotoxins
A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Cartridge Nominal Length
1 in. (2.5 cm)
Catalogue Number
KR99A51FF1
Chemistry
Polypropylene (PP)
Device Configuration
Capsule
Device Material
Polypropylene
Device Size
1 in.
Diameter
10.7 cm (4.2 in.)
European Pressure Equipment Directive
EMD Millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
Format
Single Layer
Good Manufacturing Practices
These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Gravimetric Extractables
The extractables level was equal to or less than 10 mg per capsule after 24 hours in water at controlled room temperature.
Housing Material
Polypropylene (PP)
Indirect Food Additive
All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Inlet Connection
Sanitary Flange
Inlet Connection Diameter
3/4 in.
Inlet to Outlet Width
21.6 cm (8.5 in.)
Length
1 in. (2.5 cm)
Material Package
Double Easy-Open bag
Material Size
1
Maximum Differential Pressure, bar (psid)
4.8 bar (70 psid) @ 20 °C
Maximum Inlet Pressure (psig)
80 psig
Maximum Inlet Pressure, bar (psi)
5.5 bar (80 psi) @ 25 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C
Maximum Inlet Temperature
25 °C
Media
Polygard®-CR
Nominal Pore Size
100.0 µm
Outlet Connection
Sanitary Flange
Outlet Connection Diameter
3/4 in.
Oxidizable Substances
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥1 L
Pore Size
100.0 µm
Seal Material
Silicone (SI)
Sterilization
3 autoclave cycles of 30 min @ 126 °C; not in-line steam sterilizable
Support Material
Polypropylene
Trade Name
Opticap®
USP Bacterial Endotoxins
A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Cartridge Nominal Length
1 in. (2.5 cm)
Catalogue Number
KR99A51HH1
Chemistry
Polypropylene (PP)
Device Configuration
Capsule
Device Material
Polypropylene
Device Size
1 in.
Diameter
10.7 cm (4.2 in.)
European Pressure Equipment Directive
EMD Millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
Format
Single Layer
Good Manufacturing Practices
These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Gravimetric Extractables
The extractables level was equal to or less than 10 mg per capsule after 24 hours in water at controlled room temperature.
Housing Material
Polypropylene (PP)
Indirect Food Additive
All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Inlet Connection
Hose Barb
Inlet Connection Diameter
9/16 in.
Inlet to Outlet Width
21.6 cm (8.5 in.)
Length
1 in. (2.5 cm)
Material Package
Double Easy-Open bag
Material Size
1
Maximum Differential Pressure, bar (psid)
4.8 bar (70 psid) @ 20 °C
Maximum Inlet Pressure (psig)
80 psig
Maximum Inlet Pressure, bar (psi)
5.5 bar (80 psi) @ 25 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C
Maximum Inlet Temperature
25 °C
Media
Polygard®-CR
Nominal Pore Size
100.0 µm
Outlet Connection
Hose Barb
Outlet Connection Diameter
9/16 in.
Oxidizable Substances
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥1 L
Pore Size
100.0 µm
Seal Material
Silicone (SI)
Sterilization
3 autoclave cycles of 30 min @ 126 °C; not in-line steam sterilizable
Support Material
Polypropylene
Trade Name
Opticap®
USP Bacterial Endotoxins
A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
AMICON ULTRA-4 4ML - 3KDa cutoff. Available in 3 pack sizes. UFC800308 - 8 pack UFC800324 - 24 pack UFC800396 - 96 pack High recovery Ultracel regenerated cellulose membrane in a range of molecular weight cut-offs High retentate recovery of greater than 90% Vertical membrane reduces concentration polarization for ultra-fast spin times (as fast as 5 minutes) Heat-sealed membrane minimizes downstream extractables 100% integrity tested for reliable performance Convenient sample monitoring with translucent housing and volume gradations Direct pipette sample access eliminates processing step to recover concentrate High concentration factors of 80–100X Applications: Concentration of biological samples containing antigens, antibodies, enzymes, nucleic acids, or microorganisms Purification of macromolecular components found in tissue culture extracts or cell lysates and protein removal prior to HPLC Concentration of dilute or pre-purified proteins from column eluents Desalting, buffer exchange and protein dialysis
Catalogue Number
UFC800308
Centrifugal Application
Protein Concentration and Desalting
Chemistry
Regenerated Cellulose (RC)
Color Code
Clear with pink cap
Device Material
Housing: Styrene/butadieneTube: PolypropyleneCap and liner: Polyethylene
AMICON ULTRA-4 4ML - 3KDa cutoff. Available in 3 pack sizes. UFC800308 - 8 pack UFC800324 - 24 pack UFC800396 - 96 pack High recovery Ultracel regenerated cellulose membrane in a range of molecular weight cut-offs High retentate recovery of greater than 90% Vertical membrane reduces concentration polarization for ultra-fast spin times (as fast as 5 minutes) Heat-sealed membrane minimizes downstream extractables 100% integrity tested for reliable performance Convenient sample monitoring with translucent housing and volume gradations Direct pipette sample access eliminates processing step to recover concentrate High concentration factors of 80–100X Applications: Concentration of biological samples containing antigens, antibodies, enzymes, nucleic acids, or microorganisms Purification of macromolecular components found in tissue culture extracts or cell lysates and protein removal prior to HPLC Concentration of dilute or pre-purified proteins from column eluents Desalting, buffer exchange and protein dialysis
Catalogue Number
UFC800308
Centrifugal Application
Protein Concentration and Desalting
Chemistry
Regenerated Cellulose (RC)
Color Code
Clear with pink cap
Device Material
Housing: Styrene/butadieneTube: PolypropyleneCap and liner: Polyethylene
AMICON ULTRA-4 4ML - 3KDa cutoff. Available in 3 pack sizes. UFC800308 - 8 pack UFC800324 - 24 pack UFC800396 - 96 pack High recovery Ultracel regenerated cellulose membrane in a range of molecular weight cut-offs High retentate recovery of greater than 90% Vertical membrane reduces concentration polarization for ultra-fast spin times (as fast as 5 minutes) Heat-sealed membrane minimizes downstream extractables 100% integrity tested for reliable performance Convenient sample monitoring with translucent housing and volume gradations Direct pipette sample access eliminates processing step to recover concentrate High concentration factors of 80–100X Applications: Concentration of biological samples containing antigens, antibodies, enzymes, nucleic acids, or microorganisms Purification of macromolecular components found in tissue culture extracts or cell lysates and protein removal prior to HPLC Concentration of dilute or pre-purified proteins from column eluents Desalting, buffer exchange and protein dialysis
Catalogue Number
UFC800324
Centrifugal Application
Protein Concentration and Desalting
Chemistry
Regenerated Cellulose (RC)
Color Code
Clear with pink cap
Device Material
Housing: Styrene/butadieneTube: PolypropyleneCap and liner: Polyethylene
AMICON ULTRA-4 4ML - 3KDa cutoff. Available in 3 pack sizes. UFC800308 - 8 pack UFC800324 - 24 pack UFC800396 - 96 pack High recovery Ultracel regenerated cellulose membrane in a range of molecular weight cut-offs High retentate recovery of greater than 90% Vertical membrane reduces concentration polarization for ultra-fast spin times (as fast as 5 minutes) Heat-sealed membrane minimizes downstream extractables 100% integrity tested for reliable performance Convenient sample monitoring with translucent housing and volume gradations Direct pipette sample access eliminates processing step to recover concentrate High concentration factors of 80–100X Applications: Concentration of biological samples containing antigens, antibodies, enzymes, nucleic acids, or microorganisms Purification of macromolecular components found in tissue culture extracts or cell lysates and protein removal prior to HPLC Concentration of dilute or pre-purified proteins from column eluents Desalting, buffer exchange and protein dialysis
Catalogue Number
UFC800324
Centrifugal Application
Protein Concentration and Desalting
Chemistry
Regenerated Cellulose (RC)
Color Code
Clear with pink cap
Device Material
Housing: Styrene/butadieneTube: PolypropyleneCap and liner: Polyethylene
AMICON ULTRA-4 4ML - 3KDa cutoff. Available in 3 pack sizes. UFC800308 - 8 pack UFC800324 - 24 pack UFC800396 - 96 pack High recovery Ultracel regenerated cellulose membrane in a range of molecular weight cut-offs High retentate recovery of greater than 90% Vertical membrane reduces concentration polarization for ultra-fast spin times (as fast as 5 minutes) Heat-sealed membrane minimizes downstream extractables 100% integrity tested for reliable performance Convenient sample monitoring with translucent housing and volume gradations Direct pipette sample access eliminates processing step to recover concentrate High concentration factors of 80–100X Applications: Concentration of biological samples containing antigens, antibodies, enzymes, nucleic acids, or microorganisms Purification of macromolecular components found in tissue culture extracts or cell lysates and protein removal prior to HPLC Concentration of dilute or pre-purified proteins from column eluents Desalting, buffer exchange and protein dialysis
Catalogue Number
UFC800396
Centrifugal Application
Protein Concentration and Desalting
Chemistry
Regenerated Cellulose (RC)
Color Code
Clear with pink cap
Device Material
Housing: Styrene/butadieneTube: PolypropyleneCap and liner: Polyethylene
AMICON ULTRA-4 4ML - 3KDa cutoff. Available in 3 pack sizes. UFC800308 - 8 pack UFC800324 - 24 pack UFC800396 - 96 pack High recovery Ultracel regenerated cellulose membrane in a range of molecular weight cut-offs High retentate recovery of greater than 90% Vertical membrane reduces concentration polarization for ultra-fast spin times (as fast as 5 minutes) Heat-sealed membrane minimizes downstream extractables 100% integrity tested for reliable performance Convenient sample monitoring with translucent housing and volume gradations Direct pipette sample access eliminates processing step to recover concentrate High concentration factors of 80–100X Applications: Concentration of biological samples containing antigens, antibodies, enzymes, nucleic acids, or microorganisms Purification of macromolecular components found in tissue culture extracts or cell lysates and protein removal prior to HPLC Concentration of dilute or pre-purified proteins from column eluents Desalting, buffer exchange and protein dialysis
Catalogue Number
UFC800396
Centrifugal Application
Protein Concentration and Desalting
Chemistry
Regenerated Cellulose (RC)
Color Code
Clear with pink cap
Device Material
Housing: Styrene/butadieneTube: PolypropyleneCap and liner: Polyethylene
Trust Merck membrane filtration devices for the collection and preparation of samples, mobile phases, and buffers to obtain the highest quality results from downstream analysis.
Whether you need to collect, separate, or remove contaminants from air or fluid samples prior to downstream analysis, our broad selection of syringe filters, membranes, filter holders and related filtration devices ensures that we have the right solution for your application.
+852-3069 6950
css@gugent.com.hk
