We have developed a unique portfolio of consumables, each adapted to the different feed water quality requirements and to your various applications. To maintain your water system’s performance, it’s critical to replace your purification cartridges on time and with genuine ISO 9001-certified parts.
Apply a concentrated jet spray of ultracleaned solvent of rinse solution to surfaces that require washing. Just connect the FilterJet dispenser to a dispensing vessel to ensure that the solvent or other liquid is filtered immediately before dispensing. Applications: Solvent Filtration Prior to Contamination Analysis, Solvent Rinsing of Machined Parts and Collection ContainersXX6702500 FilterJet Solvent DispenserReplacement PartsXX6702501 Handle and Valve AssemblyXX6702502 Valve Seals, PTFEXX6702506 Pressure Tubing with 1/4 in. NPT Adapters, PEXX6702507 Tube Adapter, 1/4 in. NPTM to 1/4 in. TubeXX6702508 Tubing, 6 mm O.D. x 3 m, polypropyleneXX6702RK Replacement Parts Kit for FilterJet Solvent DispenserXX4002500 Gas Line Filter Holder, 25 mm, stainless steelXX40025RK Replacement Parts Kit for Filter HolderAccessoriesXX6700P05 Dispensing Pressure Vessel, 5 LYY1301015 Pressure Gauge, 0-7 barYY2029348 Ball Valve, 1/4 in. NPTF, stainless steelXX6700030 Quick-release Nipple & Coupling, 1/4 in. NPTM
Catalogue Number
XX40025RK
Components
includes (5) PTFE locking nut washers, (5) fluoroelastomer-A O-rings, (5) stainless steel support screens
Material Size
1
Materials of Construction
PTFE locking nut washers, PTFE O-rings, stainless steel support screen
Millipore has a broad selection of fittings, adapters, valves, gauges, and tubing that can be used in conjunction with Millipore filtration systems. With stated exceptions, material of construction is Series 300 stainless steel.Tri-Clamp (TC) fittings are referred to by convention as 1 1/2", 2", etc. 1 1/2" TC fittings connect to 1" or 1 1/2" O.D. tube sizes. 2" TC fittings connect to 2" O.D. tube size only.
Millipore has a broad selection of fittings, adapters, valves, gauges, and tubing that can be used in conjunction with Millipore filtration systems. With stated exceptions, material of construction is Series 300 stainless steel.Tri-Clamp (TC) fittings are referred to by convention as 1 1/2", 2", etc. 1 1/2" TC fittings connect to 1" or 1 1/2" O.D. tube sizes. 2" TC fittings connect to 2" O.D. tube size only.
Simultaneously vacuum filter 12 samples for rapid analysis of retentate or filtrate. Numbered positions on the filter plate assure accurate sample tracking. Sealing stoppers maintain vacuum on unused sample cups. Accessory extension barrels increase sample volumes from 15 to 50 mL. ApplicationsGeneral Filtration of 15 to 50 mL Samples, Preparation for Scintillation CountingXX2702550 1225 Sampling ManifoldReplacement PartsYY2214257 Hand Knob5162 Top PlateXX2702509 Filter O-ring, silicone5163 Support PlateXX2702510 Support Screen, 25 mm, polypropyleneXX11000PP Ball Valve, glass-filled polypropyleneXX2504755 Tubing, 1/4 in. x 23 in., latexAccessoriesXX2702552 Chamber O-rings and Plug SetXX2702555 Sample Cup Extension BarrelXX6200006P Filter Forceps, blunt end, stainless steelXX7100004 Tubing 3/16 in. I.D. x 140 cm, silicone
Millipore has a broad selection of fittings, adapters, valves, gauges, and tubing that can be used in conjunction with Millipore filtration systems. With stated exceptions, material of construction is Series 300 stainless steel.Tri-Clamp (TC) fittings are referred to by convention as 1 1/2", 2", etc. 1 1/2" TC fittings connect to 1" or 1 1/2" O.D. tube sizes. 2" TC fittings connect to 2" O.D. tube size only.
Flow Limiting Orifices create quantitative airflow through a MF-Millipore filter for airborne contamination analysis. The orifices are threaded into the outlet of a Millipore Aerosol Analysis Holder or Aerosol Adapter to enable a constant flow rate when required vacuum level is applied.Ratings are accurate to within approximately 15%. For greater precision, calibrate orifice with a flowmeter at actual working vacuum level.
Flow Limiting Orifices create quantitative airflow through a MF-Millipore filter for airborne contamination analysis. The orifices are threaded into the outlet of a Millipore Aerosol Analysis Holder or Aerosol Adapter to enable a constant flow rate when required vacuum level is applied.Ratings are accurate to within approximately 15%. For greater precision, calibrate orifice with a flowmeter at actual working vacuum level.
Applications:In-Line Stainless Steel Filter Holders are commonly used for the filtration of gases or liquids at inlet pressures of 20 to 700 bar. Differential pressure depends on filter type used. All filter holders may be autoclaved (available in 25 mm and 47 mm).Filter holder XX4404700 is equipped with a back-pressure support screen. It may be autoclaved with filter in-place, if PTFE-coated support screens, XX4404702 and XX4404704, are used. - XX4204709, XX4304701, XX4404703, 5614, and 00907P are replacement parts for Filter Holder XX4404700.Filter holder XX4504700 may be equipped with an upstream filter support screen, XX4504704, for back-pressure protection of filter.- XX4504704, XX4504705, XX4504710, XX4504713, and XX45047RK are replacement parts for Filter Holder XX4504700.Replacement parts for the 25mm SS Filter Holder are available as a kit under Catalog Number XX45025RK, which includes: (3) stainless steel hex-cap screws, (3) LCR-treated Buna-N O-rings (2-018), (1) stainless steel support screen, (1) Allen™ wrench.
Trust Merck membrane filtration devices for the collection and preparation of samples, mobile phases, and buffers to obtain the highest quality results from downstream analysis.
Whether you need to collect, separate, or remove contaminants from air or fluid samples prior to downstream analysis, our broad selection of syringe filters, membranes, filter holders and related filtration devices ensures that we have the right solution for your application.
+852-3069 6950
css@gugent.com.hk
