LXV323.99.30002				 
				
					TSS sc Turbidity and Suspended Solids Inline Probe, Stainless Steel 
				 
				
				
				
					 6913   
					
				 
				
				     
					
					
					    
						 
						Add to Cart
					
					 
				 
				
			 
			
						
			    				
										Automatic Wiper 
					No 
										Cable Length 
					10 m (optional extension cables available) 
										Calibration Method 
					Turbidity Formazin or StablCal® Standard (at 800 NTU). Requires a calibration kit. Suspended Solids Sample specific, based on gravimetric analysis with a correction factor procedure. 
										Flow 
					Max. 3 m/s (the presence of air bubbles affects the measurement) 
										Length 
					332 mm 
										Maintenance Interval 
					1 h/month 
										Material 
					Optics Carrier and Sleeve: stainless steel 1.4460 / stainless steel 1.4571 
										Max. cable length Sensor-to-Controller 
					100 
										Measuring Principle 
					Turbidity: 2-channel 90° scattered light measurement in accordance with DIN/EN 27027/ISO7027TSS: Modified absorption measurementEight-channel multiple-angle measurement, wavelength = 860 nm 
										Model 
					TSS sc 
										Operating Temperature Range 
					0 - 60 °C 
										Parameter 
					Turbidity, Suspended Solids 
										Pressure Range 
					< 10 bar or < 100 m 
										Range 
					Turbidity (TRB): 0.001 - 9999 NTUSolids (TSS): 0.001 - 500 g/L 
										Repeatability 
					TSS content: < 4 %Turbidity: < 3 % 
										Response Time T90 
					1 - 300 s adjustable 
										Special Notes 
					Installation note:Distance sensor–wall > 10 cm (TSS) 
										Warranty 
					12 months 
										Weight 
					Approx. 1.6 kg 
										What's included? 
					Turbidity & Suspended Solids sensor, user manual 
									 
							 
			 
						
				
					 
					 
				 
				
					HACH08362=A=1111				 
				
					8362 Ultrapure Water ORP Sensor 
				 
				
				
				
					 1818   
					
				 
				
				     
					
					
					    
						 
						Add to Cart
					
					 
				 
				
			 
			
						
			    				
										Cable Length 
					3 m Cable Length 
										Flow 
					100 - 400 mL/min 
										Material 
					Housing: Polyester Coated AluminiumScrews: Stainless Steel 
										Operating Temperature Range 
					-20 - 60 °C 
										Pressure Range 
					Maximum Pressure: 16 bar at 25 °C, 6 bar at 100 °C 
										Range 
					-1500 - 1500 
										Warranty 
					6 months 
										Weight 
					0.9 kg 
										What's included? 
					8362 analog ORP sensor, instruction manual 
									 
							 
			 
						
				
					 
					 
				 
				
					HACH6178001				 
				
					8362sc High Purity Water ORP Panel 
				 
				
				
				
					 2275   
					
				 
				
				     
					
					
					    
						 
						Add to Cart
					
					 
				 
				
			 
			
						
			    				
										Cable Length 
					7.7 m (25 ft.), supplied 
										Operating Temperature Range 
					0 - 60 °C 
										Parameter 
					ORP 
										Range 
					-1500 - 1500 mV at 0 - 80°C (32 - 176°F) 
										Repeatability 
					± 2 mV at 25°C  (constant flow) 
										Warranty 
					12 months 
										Weight 
					3.6 kg 
										What's included? 
					Includes: sensor, junction box, flow meter, mounting assembly and manual 
									 
							 
			 
						
				
					 
					 
				 
				
					HACH9582.99.73P4				 
				
					Hach 9582sc Dissolved Oxygen System with Profibus DP Communications, 24 V DC 
				 
				
				
				
					 Special offer   
					
				 
				
				     
					
					
					    
						 
						Add to Cart
					
					 
				 
				
			 
			
						
			    				
										Cable Length 
					10 m (33 ft) 
										Calibration Method 
					Zero: Electrically or with oxygen free water, Slope: in air or against a laboratory measurement 
										Communication Capabilities 
					Profibus DP (includes sculpted barrier) 
										Conduit Openings 
					1/2" NPT Conduit 
										Display 
					Graphic dot matrix LCD with LED backlighting, transreflective 
										Enclosure Rating 
					IP66 / NEMA 4X 
										Maintenance Interval 
					Membrane Lifetime: 6 months depending on sample 
										Material 
					Electrodes: Gold cathode, Silver anode; Flow-through cell: Stainless Steel 316L; Membrane: PFA, Sensor Body: Noryl 
										Material Enclosures 
					PolycarbonateAluminium (powder coated)Stainless Steel 
										Measurements 
					0 to 2000 ppb (0-2 ppm) 
										Operating Temperature Range 
					-20 - 60 °C at 0 -  95% RH (non-condensing) 
										Power Requirements (Voltage) 
					24 V DC 
										Range 
					0 - 2000 ppb (0-2 ppm) 
										Relays 
					Four electromechanical SPDT (Form C) contacts, 1200 W, 5 A 
										Repeatability 
					± 0.5 ppb or ±5%, whichever is greater 
										Storage Conditions 
					-20 °C to 70 °C 
										Weight 
					3.2 kg 
										What's included? 
					Controller, Mounting Hardware, Oxygen sensor, Temperature Sensor, Cable, Flow-Chamber, Basic User Manual 
									 
							 
			 
						
				
					 
					 
				 
				
					HACH9582.99.79P4				 
				
					Polymetron 9582 Dissolved Oxygen System with 4-20mA Output Communications, 24 V DC 
				 
				
				
				
					 Special offer   
					
				 
				
				     
					
					
					    
						 
						Add to Cart
					
					 
				 
				
			 
			
						
			    				
										Cable Length 
					10 m (33 ft) 
										Calibration Method 
					Zero: Electrically or with oxygen free water, Slope: in air or against a laboratory measurement 
										Communication Capabilities 
					5x 4-20mA Out 
										Conduit Openings 
					1/2" NPT Conduit 
										Display 
					Graphic dot matrix LCD with LED backlighting, transreflective 
										Enclosure Rating 
					IP66 / NEMA 4X 
										Maintenance Interval 
					Membrane Lifetime: 6 months depending on sample 
										Material 
					Electrodes: Gold cathode, Silver anode; Flow-through cell: Stainless Steel 316L; Membrane: PFA, Sensor Body: Noryl 
										Material Enclosures 
					PolycarbonateAluminium (powder coated)Stainless Steel 
										Measurements 
					0 to 2000 ppb (0-2 ppm) 
										Operating Temperature Range 
					-20 - 60 °C at 0 -  95% RH (non-condensing) 
										Power Requirements (Voltage) 
					24 V DC 
										Range 
					0 - 2000 ppb (0-2 ppm) 
										Relays 
					Four electromechanical SPDT (Form C) contacts, 1200 W, 5 A 
										Repeatability 
					± 0.5 ppb or ±5%, whichever is greater 
										Storage Conditions 
					-20 °C to 70 °C 
										Weight 
					3.2 kg 
										What's included? 
					Controller, Mounting Hardware, Oxygen sensor, Temperature Sensor, Cable, Flow-Chamber, Basic User Manual 
									 
							 
			 
						
				
					 
					 
				 
				
					HACH9582.99.09P4				 
				
					Polymetron 9582 Dissolved Oxygen System with 4-20mA Output Communications, AC-DC 
				 
				
				
				
					 Special offer   
					
				 
				
				     
					
					
					    
						 
						Add to Cart
					
					 
				 
				
			 
			
						
			    				
										Cable Length 
					10 m (33 ft) 
										Calibration Method 
					Zero: Electrically or with oxygen free water, Slope: in air or against a laboratory measurement 
										Communication Capabilities 
					5x 4-20mA Out 
										Conduit Openings 
					1/2" NPT Conduit 
										Display 
					Graphic dot matrix LCD with LED backlighting, transreflective 
										Enclosure Rating 
					IP66 / NEMA 4X 
										Maintenance Interval 
					Membrane Lifetime: 6 months depending on sample 
										Material 
					Electrodes: Gold cathode, Silver anode; Flow-through cell: Stainless Steel 316L; Membrane: PFA, Sensor Body: Noryl 
										Material Enclosures 
					PolycarbonateAluminium (powder coated)Stainless Steel 
										Measurements 
					0 to 2000 ppb (0-2 ppm) 
										Operating Temperature Range 
					-20 - 60 °C at 0 -  95% RH (non-condensing) 
										Power Requirements (Voltage) 
					100 - 240 VAC 
										Range 
					0 - 2000 ppb (0-2 ppm) 
										Relays 
					Four electromechanical SPDT (Form C) contacts, 1200 W, 5 A 
										Repeatability 
					± 0.5 ppb or ±5%, whichever is greater 
										Storage Conditions 
					-20 °C to 70 °C 
										Weight 
					3.2 kg 
										What's included? 
					Controller, Mounting Hardware, Oxygen sensor, Temperature Sensor, Cable, Flow-Chamber, Basic User Manual 
									 
							 
			 
						
				
					 
					 
				 
				
					HACH9582.99.75P4				 
				
					Polymetron 9582 Dissolved Oxygen System with HART Communications, 24 V DC 
				 
				
				
				
					 Special offer   
					
				 
				
				     
					
					
					    
						 
						Add to Cart
					
					 
				 
				
			 
			
						
			    				
										Cable Length 
					10 m (33 ft) 
										Calibration Method 
					Zero: Electrically or with oxygen free water, Slope: in air or against a laboratory measurement 
										Communication Capabilities 
					Hart 
										Conduit Openings 
					1/2" NPT Conduit 
										Display 
					Graphic dot matrix LCD with LED backlighting, transreflective 
										Enclosure Rating 
					IP66 / NEMA 4X 
										Maintenance Interval 
					Membrane Lifetime: 6 months depending on sample 
										Material 
					Electrodes: Gold cathode, Silver anode; Flow-through cell: Stainless Steel 316L; Membrane: PFA, Sensor Body: Noryl 
										Material Enclosures 
					PolycarbonateAluminium (powder coated)Stainless Steel 
										Measurements 
					0 to 2000 ppb (0-2 ppm) 
										Operating Temperature Range 
					-20 - 60 °C at 0 -  95% RH (non-condensing) 
										Power Requirements (Voltage) 
					24 V DC 
										Range 
					0 - 2000 ppb (0-2 ppm) 
										Relays 
					Four electromechanical SPDT (Form C) contacts, 1200 W, 5 A 
										Repeatability 
					± 0.5 ppb or ±5%, whichever is greater 
										Storage Conditions 
					-20 °C to 70 °C 
										Weight 
					3.2 kg 
										What's included? 
					Controller, Mounting Hardware, Oxygen sensor, Temperature Sensor, Cable, Flow-Chamber, Basic User Manual 
									 
							 
			 
						
				
					 
					 
				 
				
					HACH9582.99.05P4				 
				
					Polymetron 9582 Dissolved Oxygen System with HART Communications, AC-DC 
				 
				
				
				
					 Special offer   
					
				 
				
				     
					
					
					    
						 
						Add to Cart
					
					 
				 
				
			 
			
						
			    				
										Cable Length 
					10 m (33 ft) 
										Calibration Method 
					Zero: Electrically or with oxygen free water, Slope: in air or against a laboratory measurement 
										Communication Capabilities 
					Hart 
										Conduit Openings 
					1/2" NPT Conduit 
										Display 
					Graphic dot matrix LCD with LED backlighting, transreflective 
										Enclosure Rating 
					IP66 / NEMA 4X 
										Maintenance Interval 
					Membrane Lifetime: 6 months depending on sample 
										Material 
					Electrodes: Gold cathode, Silver anode; Flow-through cell: Stainless Steel 316L; Membrane: PFA, Sensor Body: Noryl 
										Material Enclosures 
					PolycarbonateAluminium (powder coated)Stainless Steel 
										Measurements 
					0 to 2000 ppb (0-2 ppm) 
										Operating Temperature Range 
					-20 - 60 °C at 0 -  95% RH (non-condensing) 
										Power Requirements (Voltage) 
					100 - 240 VAC 
										Range 
					0 - 2000 ppb (0-2 ppm) 
										Relays 
					Four electromechanical SPDT (Form C) contacts, 1200 W, 5 A 
										Repeatability 
					± 0.5 ppb or ±5%, whichever is greater 
										Storage Conditions 
					-20 °C to 70 °C 
										Warranty 
					12 months 
										Weight 
					3.2 kg 
										What's included? 
					Controller, Mounting Hardware, Oxygen sensor, Temperature Sensor, Cable, Flow-Chamber, Basic User Manual 
									 
							 
			 
						
				
					 
					 
				 
				
					HACH9582.99.71P4				 
				
					Polymetron 9582 Dissolved Oxygen System with Modbus Communications, 24 V DC 
				 
				
				
				
					 Special offer   
					
				 
				
				     
					
					
					    
						 
						Add to Cart
					
					 
				 
				
			 
			
						
			    				
										Cable Length 
					10 m (33 ft) 
										Calibration Method 
					Zero: Electrically or with oxygen free water, Slope: in air or against a laboratory measurement 
										Communication Capabilities 
					Modbus RS232/RS485 
										Conduit Openings 
					1/2" NPT Conduit 
										Display 
					Graphic dot matrix LCD with LED backlighting, transreflective 
										Enclosure Rating 
					IP66 / NEMA 4X 
										Maintenance Interval 
					Membrane Lifetime: 6 months depending on sample 
										Material 
					Electrodes: Gold cathode, Silver anode; Flow-through cell: Stainless Steel 316L; Membrane: PFA, Sensor Body: Noryl 
										Material Enclosures 
					PolycarbonateAluminium (powder coated)Stainless Steel 
										Measurements 
					0 to 2000 ppb (0-2 ppm) 
										Operating Temperature Range 
					-20 - 60 °C at 0 -  95% RH (non-condensing) 
										Power Requirements (Voltage) 
					24 V DC 
										Range 
					0 - 2000 ppb (0-2 ppm) 
										Relays 
					Four electromechanical SPDT (Form C) contacts, 1200 W, 5 A 
										Repeatability 
					± 0.5 ppb or ±5%, whichever is greater 
										Storage Conditions 
					-20 °C to 70 °C 
										Weight 
					3.2 kg 
										What's included? 
					Controller, Mounting Hardware, Oxygen sensor, Temperature Sensor, Cable, Flow-Chamber, Basic User Manual 
									 
							 
			 
						
				
					 
					 
				 
				
					HACH9582.99.70P4				 
				
					Polymetron 9582 Dissolved Oxygen System, 24 V DC 
				 
				
				
				
					 Special offer   
					
				 
				
				     
					
					
					    
						 
						Add to Cart
					
					 
				 
				
			 
			
						
			    				
										Cable Length 
					10 m (33 ft) 
										Calibration Method 
					Zero: Electrically or with oxygen free water, Slope: in air or against a laboratory measurement 
										Communication Capabilities 
					Standard (2x 4-20 mA outputs) 
										Conduit Openings 
					1/2" NPT Conduit 
										Display 
					Graphic dot matrix LCD with LED backlighting, transreflective 
										Enclosure Rating 
					IP66 / NEMA 4X 
										Maintenance Interval 
					Membrane Lifetime: 6 months depending on sample 
										Material 
					Electrodes: Gold cathode, Silver anode; Flow-through cell: Stainless Steel 316L; Membrane: PFA, Sensor Body: Noryl 
										Material Enclosures 
					PolycarbonateAluminium (powder coated)Stainless Steel 
										Measurements 
					0 to 2000 ppb (0-2 ppm) 
										Operating Temperature Range 
					-20 - 60 °C at 0 -  95% RH (non-condensing) 
										Power Requirements (Voltage) 
					24 V DC 
										Range 
					0 - 2000 ppb (0-2 ppm) 
										Relays 
					Four electromechanical SPDT (Form C) contacts, 1200 W, 5 A 
										Repeatability 
					± 0.5 ppb or ±5%, whichever is greater 
										Storage Conditions 
					-20 °C to 70 °C 
										Warranty 
					12 months 
										Weight 
					3.2 kg 
										What's included? 
					Controller, Mounting Hardware, Oxygen sensor, Temperature Sensor, Cable, Flow-Chamber, Basic User Manual