In stock
Agilent Technologies AGIL990967-902
ZORBAX Eclipse XDB-C18, 80Å, 4.6 x 250 mm, 5 µm, 400 bar pressure limit
706 /Each
Agilent Technologies AGIL880975-902
ZORBAX StableBond C18, 4.6 x 250 mm, 5 µm, 400 bar. 80Å, 400 bar pressure limit.
711 /Each
Agilent Technologies AGIL880975-912
ZORBAX StableBond Phenyl, 4.6 x 250 mm, 5 µm, 400 bar. 80Å, 400 bar pressure limit.
Agilent Technologies AGIL588925-902
TC-C18(2), 170Å, 4.6 x 250 mm, 5 µm, 400 bar pressure limit
373 /Each
GL Sciences Inc. GLS5020-02125
Inertsil ODS HPLC Column, 5 µm, 250 x 2.1 mm (analytical)
770 /Each
Pall Corporation HC9100FRT13Z
Supralon GlassFiber 25 micron (Beta 2000) Fluorocarbon 13in 33.02cm
200 /Each
Thermo Fisher Scientific Inc. THM50076199
Glass, Side Wall Replacement
370.44 /Each
Thermo Fisher Scientific Inc. THM197-1002-00
OP LCD DISPLAY PCB ASSY. (115V, 220/230V))
971.61 /Each
Agilent Technologies AGIL123-3232
J&W DB-FFAP GC Column, 30 m, 0.32 mm, 0.25 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all non-Agilent GC systems with a similarly sized oven.
649 /Each
Thermo Fisher Scientific Inc. THM6042.2395
Viper™ Fingertight Fitting Systems, MP35N, 0.10 mm ID
952.56 /Each
Agilent Technologies AGIL122-5711-KEY
J&W DB-5HT GC column, 15 m, 0.25 mm, 0.10 µm, with smart key, for 8890 GC system
443 /Each
GL Sciences Inc. GLS3008-98805
Smart Bag 2F EE-5, EE - Standard sleeve (top) + M6 connector (side), 5 L
28 /Each
Agilent Technologies AGIL5068-0045
Bio-inert rotor seal, PEEK, for Bio-inert 4 column selection valve
661 /Each
Thermo Fisher Scientific Inc. THM40105-059070A
Hypersil™ PREP BDS C8 HPLC Column, 5 μm, 10 × 50 mm
1706.14 /Each
Agilent Technologies G8010-60346
Nebulizer, gas humidifier, for 5000 Series ICP-OES and 4200 Series MP-AES. Used to humidify the nebulizer gas when analyzing samples with high concentrations of Total Dissolved Solids (TDS). This helps to reduce blockage in the nebulizer and sample introd
1716 /Each
Agilent Technologies PL1912-1502
PLRP-S 1000Å, 2.1 x 50 mm, 5 µm