We have developed a unique portfolio of consumables, each adapted to the different feed water quality requirements and to your various applications. To maintain your water system’s performance, it’s critical to replace your purification cartridges on time and with genuine ISO 9001-certified parts.
These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Material Size
1
Outlet Connection
Stepped Hose Barb with Bell
Outlet Connection Diameter
1/4 in.
Overview
Millipak® Gold 0.22 μm sterile filter produces particulate- and bacteria-free pure water at the point of dispense of the Milli-Q® IQ 7000, Milli-Q® IQ 7003/05/10/15, Milli-Q® IX 7003/05/10/15, and Milli-Q® EQ 7000/08/16 water systems. The membrane consists of conical pores that allow the water to filter at a higher flow rate with low differential pressure. Product water can be used in a variety of laboratory applications, including cell culture and microbiology. The e-Sure tag for RFID connection with the E-POD® or Q-POD® dispenser enables full traceability and consumables status monitoring.
A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Bacterial Retention
Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
Catalogue Number
MPGL10ZW1
Chemistry
Polyvinylidene Fluoride (PVDF)
Components
0,22 µm Durapore® filter membrane for bacteria removal
Device Configuration
Capsule
Diameter
1/4 in.
Good Manufacturing Practices
These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Gravimetric Extractables
The extractables level was equal to or less than 2.5 mg per device after 24 hours in water at controlled room temperature.
Inlet Connection
NPT
Inlet Connection Diameter
1/4 in.
Length
13 cm (5.1 in.)
Material Size
1
Media
Durapore®
Non-Fiber Releasing
This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
Outlet Connection
NPT
Outlet Connection Diameter
1/4 in.
Overview
Millipak® filters are best-in-class proven products, utilized in water purification systems to provide particulate-free and bacteria-free water at the point of dispense. The Millipak® 100 Bacteria Filter removes bacteria from pure water before entering the analyzer to reduce the risk of microbial contamination. This filter contains hydrophilic 0.22 μm Durapore® PVDF membranes for high flow rates and throughput. Low protein binding membrane yields high sample recovery with minimal loss of valuable product ensuring high-value filtration.
Pore Size
0.22 µm
Sterility
Non-Sterile
Trade Name
Millipak®
USP Bacterial Endotoxins
A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
The Stericup® vacuum filtration system is the most efficient single-use, disposable process for sterile media preparation. It combines a Steritop® filter unit with a receiver flask for processing and storing volumes from 150 mL to 1,000 mL in a single, ready-to-use format. Its no-tip, easy-grip flask design and balanced profile improve stability during filtration in tight laminar flow hoods, and the convenient labeling and packaging make it easy to open and track each device. The bottom of the receiver flask is slightly recessed, so you can conveniently stack capped flasks after filtration, maximizing precious refrigeration space. You can also use Steritop® bottle-top devices with your own sterile capture flask or bottle. Features & Benefits Millipore Express® PLUS membrane for fastest flow rates and low protein binding to minimize absorption and protein loss, which affect downstream performance and costs Durapore® membrane for ultra-low protein binding for minimum absorption and protein loss Snug tight packaging, easy tear-open pouch, and convenient label designs make storing, opening and tracking your devices easy and efficient Stable base and easy grip design of the Stericup® device enable any user to comfortably perform all stages of the workflow in a laminar flow hood Recessed bottom of Stericup receiver flasks allows flasks to be stacked easily in refrigerated spaces Applications Sterilization of Aqueous Solutions (150 mL to 1 L); Sterile Filtration of Culture Media and Buffers with High-Value Protein or Small Molecule Component
Catalogue Number
SCGPS01RE
Chemistry
Polyethersulfone (PES)
Color Code
Clear with blue adapter
Device Material
Polystyrene
Diameter
12.5 cm
Filter Diameter (⌀)
33 mm
Filtration Area
40 cm²
Fitting Inlet
Funnel
Fitting Outlet
33 mm thread
Funnel Capacity
150 mL
Height
74 mm
Hold-up Volume
2.4 mL
Key Applications
Sterile Filtration
Material Size
12 pack, GP 0.22 µm Polyethersulfone 150 mL 33 mm Radio-sterilized
The Stericup® vacuum filtration system is the most efficient single-use, disposable process for sterile media preparation. It combines a Steritop® filter unit with a receiver flask for processing and storing volumes from 150 mL to 1,000 mL in a single, ready-to-use format. Its no-tip, easy-grip flask design and balanced profile improve stability during filtration in tight laminar flow hoods, and the convenient labeling and packaging make it easy to open and track each device. The bottom of the receiver flask is slightly recessed, so you can conveniently stack capped flasks after filtration, maximizing precious refrigeration space. You can also use Steritop® bottle-top devices with your own sterile capture flask or bottle. Features & Benefits Millipore Express® PLUS membrane for fastest flow rates and low protein binding to minimize absorption and protein loss, which affect downstream performance and costs Durapore® membrane for ultra-low protein binding for minimum absorption and protein loss Snug tight packaging, easy tear-open pouch, and convenient label designs make storing, opening and tracking your devices easy and efficient Stable base and easy grip design of the Stericup® device enable any user to comfortably perform all stages of the workflow in a laminar flow hood Recessed bottom of Stericup receiver flasks allows flasks to be stacked easily in refrigerated spaces Applications Sterilization of Aqueous Solutions (150 mL to 1 L); Sterile Filtration of Culture Media and Buffers with High-Value Protein or Small Molecule Component
Catalogue Number
SCGPS01RE
Chemistry
Polyethersulfone (PES)
Color Code
Clear with blue adapter
Device Material
Polystyrene
Diameter
12.5 cm
Filter Diameter (⌀)
33 mm
Filtration Area
40 cm²
Fitting Inlet
Funnel
Fitting Outlet
33 mm thread
Funnel Capacity
150 mL
Height
74 mm
Hold-up Volume
2.4 mL
Key Applications
Sterile Filtration
Material Size
12 pack, GP 0.22 µm Polyethersulfone 150 mL 33 mm Radio-sterilized
The Stericup® vacuum filtration system is the most efficient single-use, disposable process for sterile media preparation. It combines a Steritop® filter unit with a receiver flask for processing and storing volumes from 150 mL to 1,000 mL in a single, ready-to-use format. Its no-tip, easy-grip flask design and balanced profile improve stability during filtration in tight laminar flow hoods, and the convenient labeling and packaging make it easy to open and track each device. The bottom of the receiver flask is slightly recessed, so you can conveniently stack capped flasks after filtration, maximizing precious refrigeration space. You can also use Steritop® bottle-top devices with your own sterile capture flask or bottle. Features & Benefits Millipore Express® PLUS membrane for fastest flow rates and low protein binding to minimize absorption and protein loss, which affect downstream performance and costs Durapore® membrane for ultra-low protein binding for minimum absorption and protein loss Snug tight packaging, easy tear-open pouch, and convenient label designs make storing, opening and tracking your devices easy and efficient Stable base and easy grip design of the Stericup® device enable any user to comfortably perform all stages of the workflow in a laminar flow hood Recessed bottom of Stericup receiver flasks allows flasks to be stacked easily in refrigerated spaces Applications Sterilization of Aqueous Solutions (150 mL to 1 L); Sterile Filtration of Culture Media and Buffers with High-Value Protein or Small Molecule Component
Catalogue Number
SCGPS02RE
Chemistry
Polyethersulfone (PES)
Color Code
Clear with blue adapter
Device Material
Polystyrene
Diameter
12.5 cm
Filter Diameter (⌀)
33 mm
Filtration Area
40 cm²
Fitting Inlet
Funnel
Fitting Outlet
33 mm thread
Funnel Capacity
250 mL
Height
95 mm
Hold-up Volume
2.4 mL
Key Applications
Sterile Filtration
Material Size
12 pack, GP, 0.22 µm, polyethersulfone, 250 mL 33 mm, radio-sterilized
The Stericup® vacuum filtration system is the most efficient single-use, disposable process for sterile media preparation. It combines a Steritop® filter unit with a receiver flask for processing and storing volumes from 150 mL to 1,000 mL in a single, ready-to-use format. Its no-tip, easy-grip flask design and balanced profile improve stability during filtration in tight laminar flow hoods, and the convenient labeling and packaging make it easy to open and track each device. The bottom of the receiver flask is slightly recessed, so you can conveniently stack capped flasks after filtration, maximizing precious refrigeration space. You can also use Steritop® bottle-top devices with your own sterile capture flask or bottle. Features & Benefits Millipore Express® PLUS membrane for fastest flow rates and low protein binding to minimize absorption and protein loss, which affect downstream performance and costs Durapore® membrane for ultra-low protein binding for minimum absorption and protein loss Snug tight packaging, easy tear-open pouch, and convenient label designs make storing, opening and tracking your devices easy and efficient Stable base and easy grip design of the Stericup® device enable any user to comfortably perform all stages of the workflow in a laminar flow hood Recessed bottom of Stericup receiver flasks allows flasks to be stacked easily in refrigerated spaces Applications Sterilization of Aqueous Solutions (150 mL to 1 L); Sterile Filtration of Culture Media and Buffers with High-Value Protein or Small Molecule Component
Catalogue Number
SCGPS02RE
Chemistry
Polyethersulfone (PES)
Color Code
Clear with blue adapter
Device Material
Polystyrene
Diameter
12.5 cm
Filter Diameter (⌀)
33 mm
Filtration Area
40 cm²
Fitting Inlet
Funnel
Fitting Outlet
33 mm thread
Funnel Capacity
250 mL
Height
95 mm
Hold-up Volume
2.4 mL
Key Applications
Sterile Filtration
Material Size
12 pack, GP, 0.22 µm, polyethersulfone, 250 mL 33 mm, radio-sterilized
The Stericap™ PLUS Universal Bottle-Top Filter Device with Millipore Express® PLUS membrane provides fast vacuum filtration and low protein binding without the need for a prefilter in most cases. It filters quickly, without clogging, even viscous solutions typical of serum-containing media. This non-cytotoxic, non-pyrogenic device can be used to fill any vacuum-rated bottle or other container with an inner neck diameter of 20 to 67 mm. This allows maximum versatility, capacity, speed, and flowthrough efficiency when you need to filter larger volumes into containers with openings of various sizes.Features & Benefits: - Millipore Express® PLUS membrane for fastest flow rates and low protein binding - Fits any vacuum-rated bottle from 20 to 67 mm in diameter for maximum flexibility - High volume capacity for larger and less frequent preparation steps - Easy flow control button so the filter can be easily transferred from bottle to bottle without turning off the vacuum each time - Free of cytotoxic and pyrogenic contaminants for robust cell culture and sensitive downstream applications Applications:Sterilization of Aqueous Solutions, Media Preparation, Buffer Preparation
The Stericap™ PLUS Universal Bottle-Top Filter Device with Millipore Express® PLUS membrane provides fast vacuum filtration and low protein binding without the need for a prefilter in most cases. It filters quickly, without clogging, even viscous solutions typical of serum-containing media. This non-cytotoxic, non-pyrogenic device can be used to fill any vacuum-rated bottle or other container with an inner neck diameter of 20 to 67 mm. This allows maximum versatility, capacity, speed, and flowthrough efficiency when you need to filter larger volumes into containers with openings of various sizes.Features & Benefits: - Millipore Express® PLUS membrane for fastest flow rates and low protein binding - Fits any vacuum-rated bottle from 20 to 67 mm in diameter for maximum flexibility - High volume capacity for larger and less frequent preparation steps - Easy flow control button so the filter can be easily transferred from bottle to bottle without turning off the vacuum each time - Free of cytotoxic and pyrogenic contaminants for robust cell culture and sensitive downstream applications Applications:Sterilization of Aqueous Solutions, Media Preparation, Buffer Preparation
Trust Merck membrane filtration devices for the collection and preparation of samples, mobile phases, and buffers to obtain the highest quality results from downstream analysis.
Whether you need to collect, separate, or remove contaminants from air or fluid samples prior to downstream analysis, our broad selection of syringe filters, membranes, filter holders and related filtration devices ensures that we have the right solution for your application.
+852-3069 6950
css@gugent.com.hk
