Merck - Filters and Filtration - Chromatography - Lab supplies

We have developed a unique portfolio of consumables, each adapted to the different feed water quality requirements and to your various applications. To maintain your water system’s performance, it’s critical to replace your purification cartridges on time and with genuine ISO 9001-certified parts.

Catalog No.		Product	Net Price
	SZRVSMLNB9	OptiScale-25 with Viresolve NFR Validation Kit, single membrane lot	281	Add to Cart
Bacterial Endotoxins Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test Catalogue Number SZRVSMLNB9 Chemistry Polyethersulfone (PES) Device Configuration Capsule Device Material PVDF Filtration Area 3.5 cm² Good Manufacturing Practices These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. Inlet Connection Female Luer Lok Key Applications Protein Purification Length 2.2 cm (0.87 in.) Material Size 9 Maximum Differential Pressure, bar (psid) Forward: 4.1 bar (60 psid) @ 25 °C. Reverse: 0.7 bar (10 psid) @ 25 °C Media Viresolve® NFR Non-Fiber Releasing This product was manufactured with a Viresolve® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). Outlet Connection Male Luer Slip Process Volume 70 mL Seal Material Silicone (SI) Sterilization Not autoclavable but are sold gamma irradiated Trade Name OptiScale® USP Bacterial Endotoxins A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test. Volume 70 mL
	ZTSCXS008	ZipTip with 0.6 µL strong cation resin	35	Add to Cart
Automation Compatible No Bed Volume 0.6 µL Binding Capacity Typically 5 µg when used with saturating amounts of analyte Catalogue Number ZTSCXS008 Device Material Polypropylene Key Applications Analytical Sample PrepMass Spectrometry Sample PrepProtein ConcentrationProtein PurificationPeptide Fractionation Length 31 mm Material Size 8 Operating Temperature Range 4至70 °C pH Range pH1.5 – pH13.5; pH2 – pH12 for 24 hour exposure Pore Size Toxicological Information Safety Information according to GHS Safety Information Product Usage Statements Storage and Shipping Information Packaging Information Material Size Sterility Non-Sterile Trade Name ZipTip Volume 0.6 µL
	ZTSCXS096	ZipTip with 0.6 µL strong cation resin	228	Add to Cart
Automation Compatible No Bed Volume 0.6 µL Binding Capacity Typically 5 µg when used with saturating amounts of analyte Catalogue Number ZTSCXS096 Device Material Polypropylene Key Applications Analytical Sample PrepMass Spectrometry Sample PrepProtein ConcentrationProtein PurificationPeptide Fractionation Length 31 mm Material Size 96 Operating Temperature Range 4 to 70 °C pH Range pH1.5 – pH13.5; pH2 – pH12 for 24 hour exposure Pore Size Toxicological Information Safety Information according to GHS Safety Information Product Usage Statements Storage and Shipping Information Packaging Information Material Size Sterility Non-Sterile Trade Name ZipTip Volume 0.6 µL
	ZTC18S096	ZipTip with 0.6 µL C18 resin	217	Add to Cart
Automation Compatible No Bed Volume 0.6 µL Binding Capacity Typically 5 µg when used with saturating amounts of analyte Catalogue Number ZTC18S096 Device Material Polypropylene Hold-up Volume 0.2 µL Key Applications Analytical Sample PrepMass Spectrometry Sample PrepProtein ConcentrationProtein PurificationPeptide Fractionation Length 31 mm Material Size 96 Operating Temperature Range 4 to 70 °C pH Range pH1.5 – pH13.5; pH2 – pH12 for 24 hour exposure Pore Size Toxicological Information Safety Information according to GHS Safety Information Product Usage Statements Storage and Shipping Information Packaging Information Material Size Sterility Non-Sterile Trade Name ZipTip Volume 0.6 µL
	ZTC18S960	ZipTip with 0.6 µL C18 resin	1542	Add to Cart
Automation Compatible No Bed Volume 0.6 µL Binding Capacity Typically 5 µg when used with saturating amounts of analyte Catalogue Number ZTC18S960 Device Material Polypropylene Hold-up Volume 0.2 µL Key Applications Analytical Sample PrepMass Spectrometry Sample PrepProtein ConcentrationProtein PurificationPeptide Fractionation Length 31 mm Material Size 960 Operating Temperature Range 4 to 70 °C pH Range pH1.5 – pH13.5; pH2 – pH12 for 24 hour exposure Pore Size Toxicological Information Safety Information according to GHS Safety Information Product Usage Statements Storage and Shipping Information Packaging Information Material Size Sterility Non-Sterile Trade Name ZipTip Volume 0.6 µL
	MX0SP01FS1	Millistak+® HC Pro Pod Depth Filter, X0SP media series, 0.11 m2 surface area	263	Add to Cart
Bacterial Endotoxins Aqueous extraction contains <0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) clot test technique Catalogue Number MX0SP01FS1 Chemistry Silica filter aid/Polyacrylic fiber Device Configuration Process Scale Pod Device Material Polypropylene Filter Grade X0SP Filtration Area 0.11 m2 Gravimetric Extractables Not Tested Height 12.5" (32 cm) Length 24.2" (62 cm) Material Size 1 Maximum Differential Pressure, bar (psid) Forward: 30 psid (2.1 bar) at 80°CReverse: 30 psid (2.1 bar) @ 25ºC Maximum Inlet Pressure, bar (psi) 50 psid (3.5 bar) @ 80ºC Sterilization Integrity is maintained after 1 autoclave cycle of 60 min @ 123 ºC. Filtration performance may be impacted post autoclave. Recommended for post use decontamination only. Trade Name Millistak+® Wettability Hydrophilic
	MX0SP05FS1	Millistak+® HC Pro Pod Depth Filter, X0SP media series, 0.55 m2 surface area	447	Add to Cart
Bacterial Endotoxins Aqueous extraction contains <0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) clot test technique Catalogue Number MX0SP05FS1 Chemistry Silica filter aid/Polyacrylic fiber Device Configuration Process Scale Pod Device Material Polypropylene Filter Grade X0SP Filtration Area 0.55 m2 Gravimetric Extractables Not Tested Height 12.5" (32 cm) Length 24.2" (62 cm) Material Size 1 Maximum Differential Pressure, bar (psid) Forward: 30 psid (2.1 bar) at 80°CReverse: 30 psid (2.1 bar) @ 25ºC Maximum Inlet Pressure, bar (psi) 50 psid (3.5 bar) @ 80ºC Sterilization Integrity is maintained after 1 autoclave cycle of 60 min @ 123 ºC. Filtration performance may be impacted post autoclave. Recommended for post use decontamination only. Trade Name Millistak+® Wettability Hydrophilic
	MX0SP10FS1	Millistak+® HC Pro Pod Depth Filter, X0SP media series, 1.1 m2 surface area	739	Add to Cart
Bacterial Endotoxins Aqueous extraction contains <0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) clot test technique Catalogue Number MX0SP10FS1 Chemistry Silica filter aid/Polyacrylic fiber Device Configuration Process Scale Pod Device Material Polypropylene Filter Grade X0SP Filtration Area 1.1 m2 Gravimetric Extractables Not Tested Height 12.5" (32 cm) Length 24.2" (62 cm) Material Size 1 Maximum Differential Pressure, bar (psid) Forward: 30 psid (2.1 bar) at 80°CReverse: 30 psid (2.1 bar) @ 25ºC Maximum Inlet Pressure, bar (psi) 50 psid (3.5 bar) @ 80ºC Sterilization Integrity is maintained after 1 autoclave cycle of 60 min @ 123 ºC. Filtration performance may be impacted post autoclave. Recommended for post use decontamination only. Trade Name Millistak+® Wettability Hydrophilic
	MX0HC027H1	Millistak+® Pod Depth Filter, X0HC media series, 0.027 m2 surface area, 1/4 in. Hose Barb connection	132	Add to Cart
Bacterial Endotoxins Aqueous extraction contains <0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) clot test technique Catalogue Number MX0HC027H1 Chemistry Cellulose (CL)Inorganic Filter Aid Device Configuration lab scale Pod Device Material Glass fiber reinforced polypropylene Filter Grade X0HC Filtration Area 0.027 m² Gravimetric Extractables Not Tested Height 14 cm (5.3 in.) Length 22 cm (8.5 in.) Material Size 1 Maximum Differential Pressure, bar (psid) Forward: 2.1 bar (30 psid) @ 25 °C; 1 bar (15 psid) @ 80 °C. Reverse: 2.1 bar (30 psid) @ 25 °C Maximum Inlet Pressure, bar (psi) 3.5 bar (50 psi) @ 25 °C; 1 bar (15 psi) @ 80 °C Sterilization 1 autoclave cycle of 60 min @ 123 ºC Trade Name Millistak+® Wettability Hydrophilic
	MX0HC027H1	Millistak+® Pod Depth Filter, X0HC media series, 0.027 m2 surface area, 1/4 in. Hose Barb connection	132	Add to Cart
Bacterial Endotoxins Aqueous extraction contains <0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) clot test technique Catalogue Number MX0HC027H1 Chemistry Cellulose (CL)Inorganic Filter Aid Device Configuration lab scale Pod Device Material Glass fiber reinforced polypropylene Filter Grade X0HC Filtration Area 0.027 m² Gravimetric Extractables Not Tested Height 14 cm (5.3 in.) Length 22 cm (8.5 in.) Material Size 1 Maximum Differential Pressure, bar (psid) Forward: 2.1 bar (30 psid) @ 25 °C; 1 bar (15 psid) @ 80 °C. Reverse: 2.1 bar (30 psid) @ 25 °C Maximum Inlet Pressure, bar (psi) 3.5 bar (50 psi) @ 25 °C; 1 bar (15 psi) @ 80 °C Sterilization 1 autoclave cycle of 60 min @ 123 ºC Trade Name Millistak+® Wettability Hydrophilic

<< 484 485 486 487 488489490 491 492 493 494 >>

Overview

Analytical Sample Preparation Membrane Filtration Devices

Trust Merck membrane filtration devices for the collection and preparation of samples, mobile phases, and buffers to obtain the highest quality results from downstream analysis.

Whether you need to collect, separate, or remove contaminants from air or fluid samples prior to downstream analysis, our broad selection of syringe filters, membranes, filter holders and related filtration devices ensures that we have the right solution for your application.

Filter Membranes

Millex® Syringe Filters

Filtration Holders & Accessories

Resources

Samplicity® G2 Filtration System with Millex Samplicity® and Millex® Filters

Related Categories