We have developed a unique portfolio of consumables, each adapted to the different feed water quality requirements and to your various applications. To maintain your water system’s performance, it’s critical to replace your purification cartridges on time and with genuine ISO 9001-certified parts.
The Millicup Filter Unit provides fast and effective filtration of solvents and buffers (up to 3L) used in HPLC and other analytical techniques.Features & Benefits:•No preparation or clean-up saves time •Available with low-protein binding hydrophilic Durapore PVDF, hydrophobic Fluoropore PTFE, and hydrophilic LCR PTFE membranes •Ultraclean design and safe operationApplications:Mobile Phase Preparation, Buffer Filtration
The Millicup Filter Unit provides fast and effective filtration of solvents and buffers (up to 3L) used in HPLC and other analytical techniques.Features & Benefits:•No preparation or clean-up saves time •Available with low-protein binding hydrophilic Durapore PVDF, hydrophobic Fluoropore PTFE, and hydrophilic LCR PTFE membranes •Ultraclean design and safe operationApplications:Mobile Phase Preparation, Buffer Filtration
activated carbon for free chlorine reduction 0,5 µm depth-filtration for particles removal
Material Size
1
Overview
The Progard® Pack optimizes system lifetime and performance by removing large particles, organic compounds, and free chlorine from tap water. This pack protects the reverse osmosis (RO) membrane against mineral scaling, organic fouling, and chlorine oxidation. The cartridge contains silver-impregnated activated carbon, depth filter, and polyphosphates for water pretreatment. It is designed for use with AFS® water purification systems and suitable for tap water feed with silt density index (SDI) 2 < 1 ppm.
The Progard® S1 Pretreatment Pack optimizes system lifetime and performance by removing large particles, organic compounds, and free chlorine from tap water. This pack protects the reverse osmosis (RO) membrane against mineral scaling, organic fouling, and chlorine oxidation. The water pretreatment pack contains silver-impregnated natural activated carbon, a depth filter, and polyphosphates. For use with Direct-Q®, Elix®, and RiOs™ 5/8/16 systems. Suitable for tap water feed with silt density index (SDI) 2 < 1 ppm.
carbon cartridge (activated ), cartridge (Polyphosphate for anti-scaling protection)
Components
Polyphosphate for anti-scaling protectionSilver-impregnated activated carbon for free chlorine reduction and bacteriostatic protectionDepth-filtration for particles removale-Sure tag RFID technology for safety and automatic pack parameters archiving
Diameter
7.9 cm (3.1 in.)
Flow Rate
4.2 L/min
Height
52.8 cm (20.8 in.)
Material Size
2
Maximum Differential Pressure, bar (psid)
6 bar
Outlet Connection
female inlet and outlet (O-rings)
Outlet Connection Diameter
11 mm
Overview
The Progard® XL-S Pretreatment Pack pretreats tap feed water by removing large particles, organic compounds, and free chlorine. This pack optimizes system lifetime and performance by protecting the reverse osmosis (RO) membrane against mineral scaling, organic fouling, and chlorine oxidation. The water pretreatment pack includes polyphosphates, silver-impregnated activated carbon, and depth filtration. It features e-Sure tag RFID technology for instant visibility of pack parameters. For use with larger RiOs™, Elix®, and AFS® E water purification systems.
Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Catalogue Number
SVPVSMLNB9
Chemistry
Modified Polyvinylidene Fluoride (Modified PVDF)
Device Configuration
Validation Kit
Device Material
PVDF
Filtration Area
3.5 cm²
Good Manufacturing Practices
These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Inlet Connection
Female Luer Lok
Key Applications
Protein Purification
Length
2.2 cm (0.87 in.)
Material Size
9
Maximum Differential Pressure, bar (psid)
Forward: 5.5 bar (80 psid). Reverse: 0.7 bar (10 psid)
Maximum Inlet Pressure, bar (psi)
5.5 bar (80 psi) @ 23 °C
Media
Viresolve® NFP
Non-Fiber Releasing
This product was manufactured with a Viresolve® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
Outlet Connection
Male Luer Slip
Process Volume
70 mL
Seal Material
Silicone (SI)
Sterilization
Water wet filter for 5 min @ 3.4 bar (50 psi); liquid cycle, slow exhaust @ 123 °C maximum 60 min
Trade Name
OptiScale®
USP Bacterial Endotoxins
A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Catalogue Number
SVPVA25NB9
Chemistry
Modified Polyvinylidene Fluoride (Modified PVDF)
Device Configuration
Validation Kit
Device Material
PVDF
Filtration Area
3.5 cm²
Good Manufacturing Practices
These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Inlet Connection
Female Luer Lok
Key Applications
Protein Purification
Length
2.2 cm (0.87 in.)
Material Size
9
Maximum Differential Pressure, bar (psid)
Forward: 5.5 bar (80 psid). Reverse: 0.7 bar (10 psid)
Maximum Inlet Pressure, bar (psi)
5.5 bar (80 psi) @ 23 °C
Media
Viresolve® NFP
Non-Fiber Releasing
This product was manufactured with a Viresolve® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
Outlet Connection
Male Luer Slip
Process Volume
70 mL
Seal Material
Silicone (SI)
Sterilization
Water wet filter for 5 min @ 3.4 bar (50 psi); liquid cycle, slow exhaust @ 123 °C maximum 60 min
Trade Name
OptiScale®
USP Bacterial Endotoxins
A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
The Sanitization Kit is a water purification accessory for chemical sanitization of water purification systems. Designed for use with RiOs™ Essential and Elix® Essential water purification systems.
Aqueous extraction contains <0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) clot test technique
Catalogue Number
MC0HC027H1
Chemistry
Cellulose (CL)Inorganic Filter Aid
Device Configuration
lab scale Pod
Device Material
Glass fiber reinforced polypropylene
Filter Grade
C0HC
Filtration Area
0.027 m²
Gravimetric Extractables
After 24 hour static soak in pure water (Type 1 DI Water) post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 100 L/m2 of media surface area: 39–69 mg/m2
Height
14 cm (5.3 in.)
Length
22 cm (8.5 in.)
Material Size
1
Maximum Differential Pressure, bar (psid)
Forward: 2.1 bar (30 psid) @ 25 °C; 1 bar (15 psid) @ 80 °C. Reverse: 2.1 bar (30 psid) @ 25 °C
Trust Merck membrane filtration devices for the collection and preparation of samples, mobile phases, and buffers to obtain the highest quality results from downstream analysis.
Whether you need to collect, separate, or remove contaminants from air or fluid samples prior to downstream analysis, our broad selection of syringe filters, membranes, filter holders and related filtration devices ensures that we have the right solution for your application.
+852-3069 6950
css@gugent.com.hk
