We have developed a unique portfolio of consumables, each adapted to the different feed water quality requirements and to your various applications. To maintain your water system’s performance, it’s critical to replace your purification cartridges on time and with genuine ISO 9001-certified parts.
The reverse osmosis (RO) membrane removes 95%-99% of feed water contaminants, including ions, particulates, bacteria, and organic molecules. The cartridge is designed for use with Elix® 35/70/100 and RiOs™ 50/100/150/200 water purification systems.
This dual wavelength (185 nm and 254 nm) UV lamp degrades organic contaminants by photooxidation and purifies water as it passes through the UV lamp. This replacement photooxidation UV lamp can be used with Milli-Q® Advantage A10 / Direct / Element / Integral / Reference water purification systems.
This replacement UV lamp photooxidizes organic compounds in purified water. It is used with Milli-Q® and Milli-Q® Plus (1989-1996) water purification systems.
The reverse osmosis (RO) membrane removes 95%-99% of feed water contaminants, including ions, particulates, bacteria, and organic molecules. The cartridge is designed for use with Elix® and RiOs™ water purification systems. The RO water produced from these systems is used in general laboratory applications such as general rinsing, feedwater to washing machines and autoclaves, or as a feed to pure and ultrapure water purification systems. For use with Elix® and RiOs™ water purification systems.
A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Bacterial Retention
Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
Catalogue Number
MPGL04GK2
Chemistry
Polyvinylidene Fluoride (PVDF)
Device Configuration
Gamma Gold Capsule
Diameter
1/4 in.
Good Manufacturing Practices
These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Gravimetric Extractables
The extractables level was equal to or less than 1.5 mg per sterilized device after a 200 mL flush and 24 hours in water at controlled room temperature.
Inlet Connection
NPTM
Inlet Connection Diameter
1/4 in.
Material Size
2
Maximum Differential Pressure, bar (psid)
Forward: 4.1 bar @ 25 °C; 1.7 bar @ 80 °C; 0.35 bar @ 123 °C; Reverse: 0.7 bar @ 25 °C
Maximum Inlet Pressure, bar (psi)
5.2 bar @ 25 °C
Media
Durapore®
Non-Fiber Releasing
This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
Outlet Connection
Stepped Hose Barb with Bell
Outlet Connection Diameter
1/4 in.
Overview
This Millipak® filter delivers particulate- and bacteria-free water at the point of dispense (POD) of water purification systems. Millipak® membrane filters are made with Durapore® PVDF membranes to provide high flow rates and throughputs, low extractable, and broad chemical compatibility. It is gamma-irradiated for additional bacteria control. The filtered water can be used for laboratory work where bacteria control is crucial (cell culture, microbiology media preparation, etc.).
Pore Size
0.22 µm
Sterility
Sterile
Trade Name
Millipak®
USP Bacterial Endotoxins
A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
one Super-C cartridge, two nuclear-grade ion exchange cartridges and one 0.22 μm Millipak® filter unit
Material Size
1
Overview
The Milli-Q® UF Cartridge Kit includes one Super-C cartridge to eliminate dissolved organics, two nuclear-grade ion-exchange cartridges to remove trace inorganic ions to 18 MΩ.cm resistivity, and one 0.22 μm Millipak® filter unit to remove bacteria and particulates from ultrapure water. This kit is used with Milli-Q® UF Bowl-style water purification systems.
The Biopak® Polisher is an ultrafiltration (UF) cartridge that produces pyrogen-, nuclease- and bacteria-free water ideal for molecular biology, biochemistry, and cell culture applications, when fed with purified water. The polisher eliminates the need for toxic agents such as DEPC, thus improving safety, saving time, and reducing costs. For use with Direct-Q® (UV), Elix® Advantage, Milli-Q® Direct/Reference, Simplicity® (UV) and Synergy® (UV) systems.
The Isopore™ membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore™ membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore™ membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.Features & Benefits:•Membrane structure retains particles on the surface, simplifying counting and analysis •Isopore™ membranes do not stain, resulting in low background interference •Non-hygroscopic, allowing for rapid drying and reduced sample analysis time •Translucent material does not require clearing for transmitted light microscopy; also available in brown variety Applications:Air Monitoring, Epifluorescent Microscopy, Chemotaxis Assays
Catalogue Number
VCTP01300
Chemistry
Polycarbonate (PC)
Diameter
Biological Information
Media
Filter Code
VCTP
Filter Color
White
Filter Diameter (⌀)
13 mm
Filter Surface
Plain
Filter Type
Screen filter
Flow Rate
0.000367 L/min x cm²/psi
Gravimetric Extractables
< 1%
Material Size
polycarbonate, Hydrophilic, 0.1 µm, 13 mm, white, plain, 100
Maximum Operating Temperature
140 °C (possible reduction in flow rates may occur after autoclaving)
The Isopore™ membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore™ membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore™ membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.Features & Benefits:•Membrane structure retains particles on the surface, simplifying counting and analysis •Isopore™ membranes do not stain, resulting in low background interference •Non-hygroscopic, allowing for rapid drying and reduced sample analysis time •Translucent material does not require clearing for transmitted light microscopy; also available in brown variety Applications:Air Monitoring, Epifluorescent Microscopy, Chemotaxis Assays
Catalogue Number
VCTP01300
Chemistry
Polycarbonate (PC)
Diameter
Biological Information
Media
Filter Code
VCTP
Filter Color
White
Filter Diameter (⌀)
13 mm
Filter Surface
Plain
Filter Type
Screen filter
Flow Rate
0.000367 L/min x cm²/psi
Gravimetric Extractables
< 1%
Material Size
polycarbonate, Hydrophilic, 0.1 µm, 13 mm, white, plain, 100
Maximum Operating Temperature
140 °C (possible reduction in flow rates may occur after autoclaving)
The Isopore™ membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore™ membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore™ membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.Features & Benefits:•Membrane structure retains particles on the surface, simplifying counting and analysis •Isopore™ membranes do not stain, resulting in low background interference •Non-hygroscopic, allowing for rapid drying and reduced sample analysis time •Translucent material does not require clearing for transmitted light microscopy; also available in brown variety Applications:Air Monitoring, Epifluorescent Microscopy, Chemotaxis Assays
Catalogue Number
VCTP14250
Chemistry
Polycarbonate (PC)
Diameter
Biological Information
Media
Filter Code
VCTP
Filter Color
White
Filter Diameter (⌀)
142 mm
Filter Surface
Plain
Filter Type
Screen filter
Flow Rate
0.000367 L/min x cm²/psi
Gravimetric Extractables
< 1%
Material Size
polycarbonate, Hydrophilic, 0.1 µm, 142 mm, white, plain, 50
Maximum Operating Temperature
140 °C (possible reduction in flow rates may occur after autoclaving)
Trust Merck membrane filtration devices for the collection and preparation of samples, mobile phases, and buffers to obtain the highest quality results from downstream analysis.
Whether you need to collect, separate, or remove contaminants from air or fluid samples prior to downstream analysis, our broad selection of syringe filters, membranes, filter holders and related filtration devices ensures that we have the right solution for your application.
+852-3069 6950
css@gugent.com.hk
