We have developed a unique portfolio of consumables, each adapted to the different feed water quality requirements and to your various applications. To maintain your water system’s performance, it’s critical to replace your purification cartridges on time and with genuine ISO 9001-certified parts.
XT1200000 is a replacement part for the MilliSolve™ Filtration System.The MilliSolve™ Filtration System has been designed for the filtration of liquid chromatography buffers and solvents under vacuum. The system uses a 0.45 µm membrane filter to eliminate particles which can shorten column life. Vacuum filtration with the MilliSolve™ system also removes a large portion of dissolved gases from buffers, reducing the risk of air bubbles interfering with LC instruments. With automatic and continuous filtration, there is no need to add liquid into a funnel as filtration progresses. Filtration occurs in a closed system, which is important when filtering hazardous fluids. If open funnel filtration is required, the 300 mL funnel replaces the vacuum cover.Features & Benefits:•Automatic, continuous solvent and buffer filtration eliminates the need to pour during filtration •2 L receiving flask includes plug and tubing for storage, eliminating filtered buffer transfer, reducing labor and lessening contamination risk •Conical 2 L flask bottom allows access to all filtered solvent or buffer Applications:Mobile Phase Preparation, Buffer Filtration
Aqueous extraction contains ≤1.0 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Cartridge Code
Code 0 (2-222) O-rings
Cartridge Nominal Length
10 in. (25 cm)
Catalogue Number
CP1501SB1
Chemistry
Borosilicate Glass Fiber (BGF)
Device Configuration
Cartridge
Device Material
Polypropylene
Device Size
10 in.
Diameter
7.4 cm (2.9 in.)
Filter Grade
AP15
Filtration Area
0.46 m²
Format
Single Layer
Good Manufacturing Practices
These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Gravimetric Extractables
The extractables level was equal to or less than 250 mg per 10-inch cartridge after 24 hours in water at controlled room temperature.
Indirect Food Additive
All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182. All component materials meet the requirements of the EU framework regulation [1935/2004/EC] regarding materials and articles intended to contact food.
Key Applications
Food and BeverageBeerBottled WaterWine
Length
10 in. (25 cm)
Material Package
Double Easy-Open bag
Material Size
1
Maximum Differential Pressure, bar (psid)
3.5 bar (50 psid) @ 25 °C
Maximum Inlet Pressure, bar (psi)
3.5 bar (50 psi) @ 25 °C
Media
Bevigard™-L
Nominal Pore Size
1.0 µm
Oxidizable Substances
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥5 L
Aqueous extraction contains ≤1.0 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Cartridge Code
Code 0 (2-222) O-rings
Cartridge Nominal Length
10 in. (25 cm)
Catalogue Number
CP1501SB1
Chemistry
Borosilicate Glass Fiber (BGF)
Device Configuration
Cartridge
Device Material
Polypropylene
Device Size
10 in.
Diameter
7.4 cm (2.9 in.)
Filter Grade
AP15
Filtration Area
0.46 m²
Format
Single Layer
Good Manufacturing Practices
These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Gravimetric Extractables
The extractables level was equal to or less than 250 mg per 10-inch cartridge after 24 hours in water at controlled room temperature.
Indirect Food Additive
All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182. All component materials meet the requirements of the EU framework regulation [1935/2004/EC] regarding materials and articles intended to contact food.
Key Applications
Food and BeverageBeerBottled WaterWine
Length
10 in. (25 cm)
Material Package
Double Easy-Open bag
Material Size
1
Maximum Differential Pressure, bar (psid)
3.5 bar (50 psid) @ 25 °C
Maximum Inlet Pressure, bar (psi)
3.5 bar (50 psi) @ 25 °C
Media
Bevigard™-L
Nominal Pore Size
1.0 µm
Oxidizable Substances
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥5 L
Trust Merck membrane filtration devices for the collection and preparation of samples, mobile phases, and buffers to obtain the highest quality results from downstream analysis.
Whether you need to collect, separate, or remove contaminants from air or fluid samples prior to downstream analysis, our broad selection of syringe filters, membranes, filter holders and related filtration devices ensures that we have the right solution for your application.
+852-3069 6950
css@gugent.com.hk
