We have developed a unique portfolio of consumables, each adapted to the different feed water quality requirements and to your various applications. To maintain your water system’s performance, it’s critical to replace your purification cartridges on time and with genuine ISO 9001-certified parts.
Aqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Cartridge Nominal Length
1.52 in. (39 mm)
Catalogue Number
SGEPA25NB6
Chemistry
Polyethersulfone (PES)
Device Configuration
Capsule
Device Material
Polypropylene
Diameter
3.1 cm (1.2 in.)
Filtration Area
3.5 cm²
Good Manufacturing Practices
These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Indirect Food Additive
All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Inlet Connection
Female Luer Lok
Length
1.52 in. (39 mm)
Material Size
6
Maximum Inlet Pressure, bar (psi)
4.1 bar (60 psi) @ 25 °C
Media
Millipore Express® SHF
Non-Fiber Releasing
This product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
Outlet Connection
Male Luer Lok
Pore Size
0.2 µm
Sterilization
1 autoclave cycle of 60 min @ 123 °C
Support Material
Polypropylene
Trade Name
Millipore Express®
USP Bacterial Endotoxins
A sample aqueous extraction contains less than 0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Aqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Cartridge Nominal Length
1.52 in. (39 mm)
Catalogue Number
SGEPA25NB6
Chemistry
Polyethersulfone (PES)
Device Configuration
Capsule
Device Material
Polypropylene
Diameter
3.1 cm (1.2 in.)
Filtration Area
3.5 cm²
Good Manufacturing Practices
These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Indirect Food Additive
All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Inlet Connection
Female Luer Lok
Length
1.52 in. (39 mm)
Material Size
6
Maximum Inlet Pressure, bar (psi)
4.1 bar (60 psi) @ 25 °C
Media
Millipore Express® SHF
Non-Fiber Releasing
This product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
Outlet Connection
Male Luer Lok
Pore Size
0.2 µm
Sterilization
1 autoclave cycle of 60 min @ 123 °C
Support Material
Polypropylene
Trade Name
Millipore Express®
USP Bacterial Endotoxins
A sample aqueous extraction contains less than 0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Trust Merck membrane filtration devices for the collection and preparation of samples, mobile phases, and buffers to obtain the highest quality results from downstream analysis.
Whether you need to collect, separate, or remove contaminants from air or fluid samples prior to downstream analysis, our broad selection of syringe filters, membranes, filter holders and related filtration devices ensures that we have the right solution for your application.
+852-3069 6950
css@gugent.com.hk
